summaryrefslogtreecommitdiffstats
path: root/sound/soc/sof/intel/byt.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ASoC: SOF: Intel: use mmio fallback for all platformsPierre-Louis Bossart2022-10-261-10/+2
| | | | | | | | | | | No need to expose an indirection when we can use the fallback. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221024165310.246183-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: byt: remove duplicating driver data retrievalAndy Shevchenko2022-07-051-4/+1
| | | | | | | | | | | device_get_match_data() in ACPI case calls similar to acpi_match_device(). Hence there is no need to duplicate the call. Just assign what is in the id->driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220705161102.76250-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: bdw/byt/pci-tng: Do not set the load_module opsPeter Ujfalusi2022-04-291-6/+0
| | | | | | | | | | | | | | | | The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic module loading, which is by default uses the same implementation as the snd_sof_parse_module_memcpy. No need to set the callback for these platforms. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220425221129.124615-8-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: Do not set fw_ready callbackPeter Ujfalusi2022-04-251-2/+0
| | | | | | | | | | | | | The fw_ready is handled internally to ipc3 and the callback no longer in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220421080735.31698-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: add IP identifierPierre-Louis Bossart2022-04-191-0/+2
| | | | | | | | | | | | This patch adds an IP identifier for each Intel platform. The identifier will be used to select different code branches or constants. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220414184817.362215-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: remove const qualifier for 'struct snd_sof_dsp_ops'Pierre-Louis Bossart2022-04-191-2/+2
| | | | | | | | | | | | | | | | | | | | | Now that we start having multiple platforms with minor variants, the use of the const qualifier for 'dsp_ops' is starting to be sub-optimal: the structures are copied across platforms, with only a couple of members that differ. This patch removes the const qualifier without any functionality changes, and adds an optional initialization callback. In follow-up patches, the dsp_ops will revisited for Intel HDaudio platforms, with the differences added programmatically over a common baseline. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220414184817.362215-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: add IPC-dependent file namesPierre-Louis Bossart2022-04-191-3/+9
| | | | | | | | | | | | | To avoid misleading file names, use different names for INTEL_IPC4 firmware files. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Chao Song <chao.song@intel.com> Link: https://lore.kernel.org/r/20220414184817.362215-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: add default IPC capability and file pathsPierre-Louis Bossart2022-04-191-0/+6
| | | | | | | | | | | | | | | | | | | This patch adds a default IPC type for each platform, along with file paths to be used for each IPC type. To make reviews simpler, we only modify platform descriptors in this table, the information will be used in the next patch. The Intel IPCv4 is only supported on Intel platforms after APL, and not by default. In follow-up patches, support for SKL and KBL will be added, and in those two cases the IPCv4 will be the default (and only supported mode). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220414184817.362215-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: add path indirection to each IPC typePierre-Louis Bossart2022-04-191-6/+18
| | | | | | | | | | | | | | | | | With the addition of the IPCv4, we need the ability to select different paths for firmware and topologies. First add an indirection. Follow-up patches will add mechanisms to select a default IPC or override it. No functionality change in this patch. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220414184817.362215-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: Convert to use the generic set_stream_data_offset opsPeter Ujfalusi2022-03-111-2/+2
| | | | | | | | | | | | | | | Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral set_stream_data_offset(). Remove the no longer used hda_ipc_pcm_params() function as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220310042720.976809-9-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Introduce num_cores and ref count per coreRanjani Sridharan2021-11-221-0/+9
| | | | | | | | | | | | | | Add two fields num_cores and dsp_cores_ref_count to struct snd_sof_dev. These will be used to maintain the ref count for each core to determine when it should be powered up or down. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Make Intel IPC stream ops genericBud Liviu-Alexandru2021-10-071-8/+8
| | | | | | | | | | | | | | | | | | | | | This operations should be generic as there is nothing Intel specific. This works well for NXP i.MX8 stream IPC ops. We start by moving sof/intel/intel-ipc.c into sof/stream-ipc.c and rename the functions to be generic. Notice that we use newly introduced snd_sof_dsp_mailbox_read instead of sof_mailbox_read, to make sure that we are not bound to existing MMIO memory access, and we allow platform to implement their own memory access routines. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211004152147.1268978-3-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Introduce snd_sof_mailbox_read / snd_sof_mailbox_write callbacksDaniel Baluta2021-10-071-0/+8
| | | | | | | | | | | | | | | | We need to introduce snd_sof_mailbox_{read/write} in order to provide a generic way for mailbox access. These routines are optional, each platform can implement their own specific routines. So far, all platforms use mmapped I/O thus they can use custom made routines sof_mailbox_read / sof_mailbox_write that use MMIO. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Bud Liviu-Alexandru <budliviu@gmail.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211004152147.1268978-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Rename sof_arch_ops to dsp_arch_opsPeter Ujfalusi2021-09-171-2/+2
| | | | | | | | | | | | | | From the name sof_arch_ops one can not decipher that these ops are DSP architecture ops. Rename it to dsp_arch_ops and change also the macro to retrieve the DSP architecture specific ops as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210916130308.7969-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: Provide debugfs_add_region_item ops for corePeter Ujfalusi2021-09-151-0/+2
| | | | | | | | | | | | | Set the generic iomem callback for debugfs_add_region_item to avoid regression when the core switches to use the generic interface for the regions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210915122116.18317-11-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: move common ATOM stuff to modulePierre-Louis Bossart2021-05-101-655/+12
| | | | | | | | | | | | | | | | Split between ACPI/PCI parts and use common module. Since it's a split of existing code, the same dual-license is used for the new atom.c and atom.h files. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Tested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210505170235.306797-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: byt: prepare split between Baytrail and MerrifieldPierre-Louis Bossart2021-05-101-136/+155
| | | | | | | | | | | | | | | | | Atom devices are split in ACPI (Baytrail/Cherrytrail) and PCI (Merrifield) cases. In preparation for a split between the two parts and the use of a common module, rename functions with the atom_ prefix when appropriate and remove explicit BYT_ prefix for common definitions. This patch should not change any functionality. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210505170235.306797-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: update set_mach_params()Pierre-Louis Bossart2021-04-121-0/+4
| | | | | | | | | | | | Add information for num_dai_drivers and dai_drivers[], which will be used in the refactored nocodec implementation Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210409220121.1542362-5-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: change signature of set_mach_params() callbackPierre-Louis Bossart2021-04-121-9/+9
| | | | | | | | | | | | | | To set additional parameters, we need to have access to sdev, not the plain vanilla struct device pointer. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210409220121.1542362-4-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: ACPI: avoid reverse module dependencyArnd Bergmann2021-03-021-8/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SOF-ACPI driver is backwards from the normal Linux model, it has a generic driver that knows about all the specific drivers, as opposed to having hardware specific drivers that link against a common framework. This requires ugly Kconfig magic and leads to missed dependencies as seen in this link error: arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_acpi_probe': sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe' Change it to use the normal probe order of starting with a specific device in a driver, turning the sof-acpi-dev.c driver into a library (exported symbols are name-spaced to avoid symbol pollution). For backwards-compatibility with previous Kconfigs, the default values for platform drivers uses the top-level ACPI configurations. The modules were also renamed to allow for gradual transitions in test scripts. Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210302003125.1178419-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: SOF: modify the SOF_DBG flagsRanjani Sridharan2020-12-111-1/+1
| | | | | | | | | | | | The SOF_DBG_* macros are used for dual purposes right now, for the sof_core_debug module parameter and for the dbg_dump() ops. So, separate these two types of flags into different types to avoid confusion. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: rename cores_mask to host_managed_cores_maskRanjani Sridharan2020-09-111-3/+3
| | | | | | | | | | | | | | | Rename the cores_mask in struct sof_intel_dsp_desc to host_managed_cores_mask to be more indicative of the fact that only these cores can be powered up/down by the host. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910164125.2033062-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: Baytrail: fix 'defined but not used' warningsPierre-Louis Bossart2020-05-291-36/+36
| | | | | | | | | | | | | | | With the allmodconfig option, CONFIG_SND_SOC_SOF_BAYTRAIL is disabled due to mutual exclusion with the legacy driver. This generates 'defined by not used' warnings. suspend/resume/remove are only supported for Baytrail for now, so move the code under the CONFIG_SND_SOC_SOF_BAYTRAIL checks. Fixes: ddcccd543f5d ("ASoC: SOF: Intel: byt: Add PM callbacks") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200529150408.17236-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: BYT: harden IPC initialization and handlingKeyon Jie2020-05-271-14/+17
| | | | | | | | | | | | | | | | | | | | On probe and reset, we should not touch the SHIM_IMRD register since it is configured by firmware. The driver only configures SHIM_IMRX with the BUSY interrupt enabled by default and DONE interrupt disabled. When sending an IPC message, the DONE interrupt is enabled until the DSP response is provided. This sequence hardens the IPC communication and avoid interrupt-related issues when adding/removing modules or during system suspend-resume transitions. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200526203640.25980-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handlerPierre-Louis Bossart2020-05-271-21/+25
| | | | | | | | | | | | | | | | | The DSP may send the same interrupt multiple times before it's handled in the interrupt thread. Rather than masking it in the thread, mask it in the handler directly. This patch also removes useless checks that cannot happen, and masks that are set don't need to be re-tested. Suggested-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> BugLink: https://github.com/thesofproject/linux/issues/1492 Link: https://lore.kernel.org/r/20200526203640.25980-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: BYT: add .remove opRanjani Sridharan2020-05-271-0/+9
| | | | | | | | | | | Add .remove op that disables interrupts and reset the DSP for BYT and CHT platforms. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200526203640.25980-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: byt: Add PM callbacksRanjani Sridharan2020-05-271-0/+36
| | | | | | | | | | Add the PM callbacks for BYT/CHT platforms. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200526203640.25980-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: Fix unused variable warningYueHaibing2020-05-081-27/+27
| | | | | | | | | | | | | | | When CONFIG_SND_SOC_SOF_BAYTRAIL is not set, gcc warns: sound/soc/sof/intel/byt.c:85:41: warning: ‘cht_debugfs’ defined but not used [-Wunused-const-variable=] static const struct snd_sof_debugfs_map cht_debugfs[] = { ^~~~~~~~~~~ Move the variable inside #ifdef Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200507072735.16588-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF/Intel: clarify SPDX license with GPL-2.0-onlyPierre-Louis Bossart2020-05-011-1/+1
| | | | | | | | | | | | Remove the ambiguity with GPL-2.0 and use an explicit GPL-2.0-only tag. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200501145850.15178-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/BroadwellPierre-Louis Bossart2020-04-171-0/+48
| | | | | | | | | | | | | | | | | | | | | | Major regressions were detected by SOF CI on CherryTrail and Broadwell: [ 25.705750] SSP2-Codec: ASoC: no backend playback stream [ 27.923378] SSP2-Codec: ASoC: no users playback at close - state This is root-caused to the introduction of the DAI capability checks with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a requirement for all DAIs to report at least a non-zero min_channels field. For some reason the SSP structures used for SKL+ did provide this information but legacy platforms didn't. Fixes: 9b5db059366ae2 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: add namespace for XTENSAPierre-Louis Bossart2019-12-181-0/+1
| | | | | | | | | Now that Xtensa stuff is only referenced in Intel stuff, define namespace and import it in Intel BYT/BDW/HDaudio modules Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191217202231.18259-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: move arch_ops under opsPierre-Louis Bossart2019-12-181-0/+6
| | | | | | | | | | | | | The current structures are not well designed. We include Xtensa information from the ACPI and PCI levels, but at the Kconfig/module level everything Xtensa related is included at the sof/intel level. Move the arch_ops under ops so that Xtensa is hidden in the DSP ops, with a structure that follows the Kconfig/module partition. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191217202231.18259-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: add namespaces for BAYTRAIL and MERRIFIELDPierre-Louis Bossart2019-12-181-6/+6
| | | | | | | | | Define separate namespaces and include them in ACPI and PCI top-level modules. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191217202231.18259-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: add module namespace for legacy IPCPierre-Louis Bossart2019-12-181-0/+1
| | | | | | | | | | The legacy IPC routines are only used by broadwell and baytrail modules, import them as needed and make sure other modules cannot load them. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191217202231.18259-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'for-5.5' of ↵Mark Brown2019-12-101-12/+13
|\ | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.6
| * ASoC: SOF: Intel: split cht and byt debug window sizesCurtis Malainey2019-12-101-3/+4
| | | | | | | | | | | | | | | | | | | | Turns out SSP 3-5 are only available on cht, to avoid dumping on undefined registers let's split the definition. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
| * ASoC: SOF: Intel: BYT: fix a copy/paste mistake in byt_dump()Keyon Jie2019-11-271-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | The shim registers in BYT/CHT/BSW are 64bits based, correct the copy/paste (from bdw.c where the shim registers are 32bits based) error in byt_dump(). Fixes: 3a9e204d4e36 ("ASoC: SOF: Intel: Add context data to any IPC timeout") Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191126141533.21601-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: SOF: Intel: byt: fixup topology filename for BYT-CRPierre-Louis Bossart2019-12-101-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On Baytrail-CR, SSP0 needs to be used instead of SSP2. The substitution is assumed to be done in the topology file. When Baytrail-CR is detected, add -ssp0 suffix to the topology file name so that the topology code picks up the correct file. Tested on Asus T100TAF Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191210004854.16845-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: SOF: Make creation of machine device from SOF core optionalDaniel Baluta2019-12-091-0/+45
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, SOF probes machine drivers by creating a platform device and passing the machine description as private data. This is driven by the ACPI restrictions. Ideally, ACPI tables should contain the description for the machine driver. This is not possible because ACPI tables are frozen and used on multiple OS-es (e.g Windows). In the case of Device Tree we don't have this restriction, so we choose to probe the machine drivers by creating a DT node as is the standard ALSA way. This patch makes the probing of machine drivers from SOF core optional allowing for Device Tree platforms to decouple the SOF core from machine driver probing. Along with this, it also consolidates the machine driver selection for Intel platforms by defining optional ops for selecting the machine driver based on the ACPI match for HDA and non-HDA platforms and setting the mach params. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191204211556.12671-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: only support INFO_BATCH for legacy platformsPierre-Louis Bossart2019-10-251-3/+3
| | | | | | | | | | | | | | | | | | | The current position update is not precise enough for PulseAudio to work reliably with the timer-based scheduling on Baytrail, Cherrytrail, Broadwell. Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that the position is only reliable and updated during period_elapsed events. This will be reverted when the firmware provides a more accurate position for those platforms. Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: define INFO_ flags in dsp_opsPierre-Louis Bossart2019-10-251-0/+21
| | | | | | | | | | | | | | | Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined in the SOF PCM core, which doesn't scale. To account for platform variations, these flags need to be set in DSP ops. This patch only moves the definitions and does not change any functionality. Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: byt: fix operator precedence warningsPierre-Louis Bossart2019-10-141-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Address cppcheck warnings sound/soc/sof/intel/byt.c:163:26: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] panic & SHIM_IPCX_BUSY ? "yes" : "no", ^ sound/soc/sof/intel/byt.c:164:26: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] panic & SHIM_IPCX_DONE ? "yes" : "no", panic); ^ sound/soc/sof/intel/byt.c:167:25: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] imrx & SHIM_IMRX_BUSY ? "yes" : "no", ^ sound/soc/sof/intel/byt.c:168:25: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] imrx & SHIM_IMRX_DONE ? "yes" : "no", imrx); ^ sound/soc/sof/intel/byt.c:171:27: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] status & SHIM_IPCD_BUSY ? "yes" : "no", ^ sound/soc/sof/intel/byt.c:172:27: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] status & SHIM_IPCD_DONE ? "yes" : "no", status); ^ sound/soc/sof/intel/byt.c:175:25: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] imrd & SHIM_IMRD_BUSY ? "yes" : "no", ^ sound/soc/sof/intel/byt.c:176:25: style: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] imrd & SHIM_IMRD_DONE ? "yes" : "no", imrd); ^ Fixes: 3a9e204d4e369 ("ASoC: SOF: Intel: Add context data to any IPC timeout.") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191011164312.7988-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'asoc-5.4' into asoc-5.5Mark Brown2019-10-021-0/+6
|\
| * ASoC: SOF: Intel: initialise and verify FW crash dump data.Liam Girdwood2019-10-011-0/+6
| | | | | | | | | | | | | | | | | | | | FW mailbox offset was not set before use and HDR size was not validated. Fix this. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190927200538.660-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* | ASoC: SOF: Intel: Add context data to any IPC timeout.Liam Girdwood2019-10-011-1/+22
|/ | | | | | | | | Helps with FW debug as it provides DSP IPC processing context. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190927200538.660-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Intel: byt: Refactor fw ready / mem windows creationDaniel Baluta2019-08-091-145/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a lot of duplicate code when processing IPC firmware ready notification and creating memory windows. First step in reducing the code duplication is to introduce generic functions: * sof_get_windows * sof_fw_ready that will replace, in the first step, the specific implementation related to baytrail related platforms: * byt_get_windows * byt_fw_ready So we are basically moving code from intel/byt.c to loader.c keeping in mind that mbox_offset is a per platform constant so we need to use newly introduced snd_sof_dsp_get_mailbox_offset / snd_sof_dsp_get_window_offset in order to get the correct mbox offset / window offset value. Also, bar is a per platform constant so we use snd_sof_dsp_get_bar_index instead of the hardcoded BYT_DSP_BAR. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190807150203.26359-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: SOF: Remove call to snd_sof_dsp_mailbox_initDaniel Baluta2019-08-091-5/+0
| | | | | | | | | | | | | | | | | This is reserved for some historical reason, we didn't enable memory windows for byt/bdw at the beginning, to make it compatible, we get those mailbox offsets from fw_ready struct firstly, and then update them if they existed in the following memory windows, to make sure the mailbox still can be used if no memory windows are created. With this change all platforms have the same implementation for xxx_fw_ready function so that we can refactor it in a common file. Suggested-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190807150203.26359-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* ASoC: Remove dev_err() usage after platform_get_irq()Stephen Boyd2019-08-021-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-50-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'asoc-5.2' into asoc-5.3Mark Brown2019-06-031-6/+9
|\
| * ASoC: SOF: fix DSP oops definitions in FW ABIKai Vehmanen2019-06-031-6/+9
| | | | | | | | | | | | | | | | | | | | | | The definitions for DSP oops structures were not aligned correctly to current FW ABI version 3.6.0, leading to invalid data being printed out to debug logs. Fix the structs and update related platform code accordingly. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 07:20:38 +0100