From e488ca9f8d4f62c2dc36bfa5c32f68e7f05ab381 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 3 Dec 2015 14:47:32 -0800 Subject: doc: dt: mtd: partitions: add compatible property to "partitions" node As noted here [1], there are potentially future conflicts if we try to use MTD's "partitions" subnode to describe anything besides just the fixed-in-the-device-tree partitions currently described in this document. Particularly, there was a proposal to use this node for the AFS parser too. It can pose a (small) problem to try to differentiate the following nodes: // using binding as currently specified partitions { #address-cells = ; #size-cells = ; partition@0 { ...; }; }; and // proposed future binding partitions { compatible = "arm,arm-flash-structure"; }; It's especially difficult if other uses of this node start having subnodes. So, since the "partitions" node is new in v4.4, let's fixup the binding before release so that it requires a compatible property, so it's much clearer to distinguish. e.g.: // proposed partitions { compatible = "fixed-partitions"; #address-cells = ; #size-cells = ; partition@0 { ...; }; }; [1] Subject: "mtd: create a partition type device tree binding" http://lkml.kernel.org/g/20151113220039.GA74382@google.com http://lists.infradead.org/pipermail/linux-mtd/2015-November/063355.html http://lists.infradead.org/pipermail/linux-mtd/2015-November/063364.html Cc: Michal Suchanek Signed-off-by: Brian Norris Acked-by: Rob Herring --- Documentation/devicetree/bindings/mtd/partition.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index f1e2a02381a4..1c63e40659fc 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -6,7 +6,9 @@ used for what purposes, but which don't use an on-flash partition table such as RedBoot. The partition table should be a subnode of the mtd node and should be named -'partitions'. Partitions are defined in subnodes of the partitions node. +'partitions'. This node should have the following property: +- compatible : (required) must be "fixed-partitions" +Partitions are then defined in subnodes of the partitions node. For backwards compatibility partitions as direct subnodes of the mtd device are supported. This use is discouraged. @@ -36,6 +38,7 @@ Examples: flash@0 { partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -53,6 +56,7 @@ flash@0 { flash@1 { partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <2>; @@ -66,6 +70,7 @@ flash@1 { flash@2 { partitions { + compatible = "fixed-partitions"; #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From fd18ab89166ab004d40f417ae1d6f5dfeecff8ee Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sat, 12 Dec 2015 14:24:26 -0800 Subject: Input: sun4i-lradc-keys - fix typo in binding documentation Trivial typo fix ("mut" -> "must") in the sunxi LRADC-keys binding documentation. Signed-off-by: Karsten Merker Acked-by: Rob Herring Acked-by: Chen-Yu Tsai Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index b9c32f6fd687..4357e498ef04 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -12,7 +12,7 @@ Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": Required subnode-properties: - label: Descriptive name of the key. - linux,code: Keycode to emit. - - channel: Channel this key is attached to, mut be 0 or 1. + - channel: Channel this key is attached to, must be 0 or 1. - voltage: Voltage in µV at lradc input when this key is pressed. Example: -- cgit v1.2.3 From f1eea5c15ae799a1291f0f481fa3ea09be913fa9 Mon Sep 17 00:00:00 2001 From: David Rivshin Date: Wed, 16 Dec 2015 23:02:10 -0500 Subject: drivers: net: cpsw: fix RMII/RGMII mode when used with fixed-link PHY Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw: Add support for fixed-link PHY") did not parse the "phy-mode" property in the case of a fixed-link PHY, leaving slave_data->phy_if with its default of PHY_INTERFACE_MODE_NA(0). This later gets passed to phy_connect() in cpsw_slave_open(), and eventually to cpsw_phy_sel() where it hits a default case that configures the MAC for MII mode. The user visible symptom is that while kernel log messages seem to indicate that the interface is set up, there is no network communication. Eventually a watchdog error occurs: NETDEV WATCHDOG: eth0 (cpsw): transmit queue 0 timed out Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw.txt | 6 ++-- drivers/net/ethernet/ti/cpsw.c | 40 ++++++++++++++------------ 2 files changed, 25 insertions(+), 21 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 9853f8e70966..28a4781ab6d7 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -40,18 +40,18 @@ Optional properties: Slave Properties: Required properties: -- phy_id : Specifies slave phy id - phy-mode : See ethernet.txt file in the same directory Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory +- phy_id : Specifies slave phy id - phy-handle : See ethernet.txt file in the same directory Slave sub-nodes: - fixed-link : See fixed-link.txt file in the same directory - Either the properties phy_id and phy-mode, - or the sub-node fixed-link can be specified + Either the property phy_id, or the sub-node + fixed-link can be specified Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index e3b220de3ed4..bc6d20dc28a0 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2026,17 +2026,15 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, for_each_child_of_node(node, slave_node) { struct cpsw_slave_data *slave_data = data->slave_data + i; const void *mac_addr = NULL; - u32 phyid; int lenp; const __be32 *parp; - struct device_node *mdio_node; - struct platform_device *mdio; /* This is no slave child node, continue */ if (strcmp(slave_node->name, "slave")) continue; priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0); + parp = of_get_property(slave_node, "phy_id", &lenp); if (of_phy_is_fixed_link(slave_node)) { struct phy_device *pd; @@ -2048,23 +2046,29 @@ static int cpsw_probe_dt(struct cpsw_priv *priv, return -ENODEV; snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, pd->bus->id, pd->addr); + } else if (parp) { + u32 phyid; + struct device_node *mdio_node; + struct platform_device *mdio; + + if (lenp != (sizeof(__be32) * 2)) { + dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i); + goto no_phy_slave; + } + mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); + phyid = be32_to_cpup(parp+1); + mdio = of_find_device_by_node(mdio_node); + of_node_put(mdio_node); + if (!mdio) { + dev_err(&pdev->dev, "Missing mdio platform device\n"); + return -EINVAL; + } + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, mdio->name, phyid); + } else { + dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i); goto no_phy_slave; } - parp = of_get_property(slave_node, "phy_id", &lenp); - if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { - dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i); - goto no_phy_slave; - } - mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); - phyid = be32_to_cpup(parp+1); - mdio = of_find_device_by_node(mdio_node); - of_node_put(mdio_node); - if (!mdio) { - dev_err(&pdev->dev, "Missing mdio platform device\n"); - return -EINVAL; - } - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, mdio->name, phyid); slave_data->phy_if = of_get_phy_mode(slave_node); if (slave_data->phy_if < 0) { dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n", -- cgit v1.2.3