From 0b8c9a837cc3588f483f2a03723aa1e3651d8665 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Mon, 11 Apr 2022 22:01:42 +0200 Subject: ARM: dts: bcm283x: Remove gpio line name NC The convention to name not connected GPIOs with NC has never been adapted. Also newer Raspberry Pi boards like RPi 4 never did. So fix this inconsistency by removing all of the NC names. Signed-off-by: Stefan Wahren Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm2835-rpi-b.dts | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'arch/arm/boot/dts/bcm2835-rpi-b.dts') diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 25d87212cefd..f589bede2b11 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -27,7 +27,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,40 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "GPIO27", "GPIO28", "GPIO29", "GPIO30", "GPIO31", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", -- cgit v1.2.3