| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
| |
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We do not clear grafts part of the parsed object pool when clearing the
pool itself, which can lead to memory leaks when a repository is being
cleared.
Fix this by moving `reset_commit_grafts()` into "object.c" and making it
part of the `struct parsed_object_pool` interface such that we can call
it from `parsed_object_pool_clear()`. Adapt `parsed_object_pool_new()`
to take and store a reference to its owning repository, which is needed
by `unparse_commit()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When calling `raw_object_store_clear()`, we close and free several
resources associated with the object store. Part of that is to close and
free all the packfiles, which is handled by `close_object_store()`.
That function really only ends up closing the packfiles though, but it
doesn't free them. And in fact it can't, as that function is being
called via `run_command()` when `close_object_store = 1`, which is done
e.g. when we execute git-maintenance(1). At that point, other structures
may still have references on those packfiles, and thus we cannot free
them here. So while it is in fact intentional that we really only close
them, the result is a memory leak because `raw_object_store_clear()`
does not free them, either.
Fix the leak by freeing the packfiles in `raw_object_store_clear()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Both `peel_object()` and `peel_iterated_oid()` implicitly rely on
`the_repository` to look up objects. Despite the fact that we want to
get rid of `the_repository`, it also leads to some restrictions in our
ref iterators when trying to retrieve the peeled value for a repository
other than `the_repository`.
Refactor these functions such that both take a repository as argument
and remove the now-unnecessary restrictions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Peeling an object has nothing to do with refs, but we still have the
code in "refs.c". Move it over into "object.c", which is a more natural
place to put it.
Ideally, we'd also move `peel_iterated_oid()` over into "object.c". But
this function is tied to the refs interfaces because it uses a global
ref iterator variable to optimize peeling when the iterator already has
the peeled object ID readily available.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As part of the transition plan, we'd like to add a file in the .git
directory that maps loose objects between SHA-1 and SHA-256. Let's
implement the specification in the transition plan and store this data
on a per-repository basis in struct repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Various parts of upload-pack has been updated to bound the resource
consumption relative to the size of the repository to protect from
abusive clients.
* jk/upload-pack-bounded-resources:
upload-pack: free tree buffers after parsing
upload-pack: use PARSE_OBJECT_SKIP_HASH_CHECK in more places
upload-pack: always turn off save_commit_buffer
upload-pack: disallow object-info capability by default
upload-pack: accept only a single packfile-uri line
upload-pack: use a strmap for want-ref lines
upload-pack: use oidset for deepen_not list
upload-pack: switch deepen-not list to an oid_array
upload-pack: drop separate v2 "haves" array
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When a client sends us a "want" or "have" line, we call parse_object()
to get an object struct. If the object is a tree, then the parsed state
means that tree->buffer points to the uncompressed contents of the tree.
But we don't really care about it. We only really need to parse commits
and tags; for trees and blobs, the important output is just a "struct
object" with the correct type.
But much worse, we do not ever free that tree buffer. It's not leaked in
the traditional sense, in that we still have a pointer to it from the
global object hash. But if the client requests many trees, we'll hold
all of their contents in memory at the same time.
Nobody really noticed because it's rare for clients to directly request
a tree. It might happen for a lightweight tag pointing straight at a
tree, or it might happen for a "tree:depth" partial clone filling in
missing trees.
But it's also possible for a malicious client to request a lot of trees,
causing upload-pack's memory to balloon. For example, without this
patch, requesting every tree in git.git like:
pktline() {
local msg="$*"
printf "%04x%s\n" $((1+4+${#msg})) "$msg"
}
want_trees() {
pktline command=fetch
printf 0001
git cat-file --batch-all-objects --batch-check='%(objectname) %(objecttype)' |
while read oid type; do
test "$type" = "tree" || continue
pktline want $oid
done
pktline done
printf 0000
}
want_trees | GIT_PROTOCOL=version=2 valgrind --tool=massif ./git upload-pack . >/dev/null
shows a peak heap usage of ~3.7GB. Which is just about the sum of the
sizes of all of the uncompressed trees. For linux.git, it's closer to
17GB.
So the obvious thing to do is to call free_tree_buffer() after we
realize that we've parsed a tree. We know that upload-pack won't need it
later. But let's push the logic into parse_object_with_flags(), telling
it to discard the tree buffer immediately. There are two reasons for
this. One, all of the relevant call-sites already call the with_options
variant to pass the SKIP_HASH flag. So it actually ends up as less code
than manually free-ing in each spot. And two, it enables an extra
optimization that I'll discuss below.
I've touched all of the sites that currently use SKIP_HASH in
upload-pack. That drops the peak heap of the upload-pack invocation
above from 3.7GB to ~24MB.
I've also modified the caller in get_reference(); a partial clone
benefits from its use in pack-objects for the reasons given in
0bc2557951 (upload-pack: skip parse-object re-hashing of "want" objects,
2022-09-06), where we were measuring blob requests. But note that the
results of get_reference() are used for traversing, as well; so we
really would _eventually_ use the tree contents. That makes this at
first glance a space/time tradeoff: we won't hold all of the trees in
memory at once, but we'll have to reload them each when it comes time to
traverse.
And here's where our extra optimization comes in. If the caller is not
going to immediately look at the tree contents, and it doesn't care
about checking the hash, then parse_object() can simply skip loading the
tree entirely, just like we do for blobs! And now it's not a space/time
tradeoff in get_reference() anymore. It's just a lazy-load: we're
delaying reading the tree contents until it's time to actually traverse
them one by one.
And of course for upload-pack, this optimization means we never load the
trees at all, saving lots of CPU time. Timing the "every tree from
git.git" request above shows upload-pack dropping from 32 seconds of CPU
to 19 (the remainder is mostly due to pack-objects actually sending the
pack; timing just the upload-pack portion shows we go from 13s to
~0.28s).
These are all highly gamed numbers, of course. For real-world
partial-clone requests we're saving only a small bit of time in
practice. But it does help harden upload-pack against malicious
denial-of-service attacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
| |
Add and apply a semantic patch for calling xstrncmpz() to compare a
NUL-terminated string with a buffer of a known length instead of using
strncmp() and checking the terminating NUL explicitly. This simplifies
callers by reducing code duplication.
I had to adjust remote.c manually because Coccinelle inexplicably
changed the indent of the else branches.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Header files cleanup.
* en/header-split-cache-h-part-3: (28 commits)
fsmonitor-ll.h: split this header out of fsmonitor.h
hash-ll, hashmap: move oidhash() to hash-ll
object-store-ll.h: split this header out of object-store.h
khash: name the structs that khash declares
merge-ll: rename from ll-merge
git-compat-util.h: remove unneccessary include of wildmatch.h
builtin.h: remove unneccessary includes
list-objects-filter-options.h: remove unneccessary include
diff.h: remove unnecessary include of oidset.h
repository: remove unnecessary include of path.h
log-tree: replace include of revision.h with simple forward declaration
cache.h: remove this no-longer-used header
read-cache*.h: move declarations for read-cache.c functions from cache.h
repository.h: move declaration of the_index from cache.h
merge.h: move declarations for merge.c from cache.h
diff.h: move declaration for global in diff.c from cache.h
preload-index.h: move declarations for preload-index.c from elsewhere
sparse-index.h: move declarations for sparse-index.c from cache.h
name-hash.h: move declarations for name-hash.c from cache.h
run-command.h: move declarations for run-command.c from cache.h
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
These functions do not depend upon struct cache_entry or struct
index_state in any way, and it seems more logical to break them out into
this file, especially since statinfo.h already has the struct stat_data
declaration.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
|
| |
The object_array API has an OBJECT_ARRAY_INIT macro, but lacks a
function to initialize an object_array at a given location in memory.
Introduce `object_array_init()` to implement such a function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
| |
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
| |
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our parse_blob_buffer() takes a ptr/len combo, just like
parse_tree_buffer(), etc, and returns success or failure. But it doesn't
actually do anything with them; we just set the "parsed" flag in the
object and return success, without even looking at the contents.
There could be some value to keeping these unused parameters:
- it's consistent with the parse functions for other object types. But
we already lost that consistency in 837d395a5c (Replace parse_blob()
with an explanatory comment, 2010-01-18).
- As the comment from 837d395a5c explains, callers are supposed to
make sure they have the object content available. So in theory
asking for these parameters could serve as a signal. But there are
only two callers, and one of them always passes NULL (after doing a
streaming check of the object hash).
This shows that there aren't likely to be a lot of callers (since
everyone either uses the type-generic parse functions, or handles
blobs individually), and that they need to take special care anyway
(because we usually want to avoid loading whole blobs in memory if
we can avoid it).
So let's just drop these unused parameters, and likewise the useless
return value. While we're touching the header file, let's move the
declaration of parse_blob_buffer() right below that explanatory comment,
where it's more likely to be seen by people looking for the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8db2dad7a0 (parse_object(): check on-disk type of suspected blob,
2022-11-17) simplified the conditional for checking if we might have a
blob. But we can simplify it further. In:
!obj || (obj && obj->type == OBJ_BLOB)
the short-circuit "OR" means "obj" will always be true on the right-hand
side. The compiler almost certainly optimized that out anyway, but
dropping it makes the conditional easier to understand for humans.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In parse_object(), we try to handle blobs by streaming rather than
loading them entirely into memory. The most common case here will be
that we haven't seen the object yet and check oid_object_info(), which
tells us we have a blob.
But we trigger this code on one other case: when we have an in-memory
object struct with type OBJ_BLOB (and without its "parsed" flag set,
since otherwise we'd return early from the function). This indicates
that some other part of the code suspected we have a blob (e.g., it was
mentioned by a tree or tag) but we haven't yet looked at the on-disk
copy.
In this case before hitting the streaming path, we check if we have the
object on-disk at all. This is mostly pointless extra work, as the
streaming path would complain if it couldn't open the object (albeit
with the message "hash mismatch", which is a little misleading).
But it's also insufficient to catch all problems. The streaming code
will only tell us "yes, the on-disk object matches the oid". But it
doesn't actually confirm that what we found was indeed a blob, and
neither does repo_has_object_file().
One way to improve this would be to teach stream_object_signature() to
check the type (either by returning it to us to check, or taking an
"expected" type). But there's an even simpler fix here: if we suspect
the object is a blob, just call oid_object_info() to confirm that we
have it on-disk, and that it really is a blob.
This is slightly less efficient than teaching stream_object_signature()
to do it (since it has to open the object already). But this case very
rarely comes up. In practice, we usually don't have any clue what the
type is, in which case we already call oid_object_info(). This
"suspected" case happens only when some other code created an object
struct but didn't actually parse the blob, which is actually tricky to
trigger at all (see the discussion of the test below).
I reworked the conditional a bit so that instead of:
if ((suspected_blob && oid_object_info() == OBJ_BLOB)
(no_clue && oid_object_info() == OBJ_BLOB)
we have the simpler:
if ((suspected_blob || no_clue) && oid_object_info() == OBJ_BLOB)
This is shorter, but also reflects what we really want say, which is
"have we ruled out this being a blob; if not, check it on-disk".
In either case, if oid_object_info() fails to tell us it's a blob, we'll
skip the streaming code path and call repo_read_object_file(), just as
before. And if we really do have a mismatch with the existing object
struct, we'll eventually call lookup_commit(), etc, via
parse_object_buffer(), which will complain that it doesn't match our
existing obj->type.
So this fixes one of the lingering expect_failure cases from 0616617c7e
(t: introduce tests for unexpected object types, 2019-04-09). That test
works by peeling a tag that claims to point to a blob (triggering us to
create the struct), but really points to something else, which we later
discover when we call parse_object() as part of the actual traversal).
Prior to this commit, we'd quietly check the sha1 and mark the blob as
"parsed". Now we correctly complain about the mismatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When parsing an object of unknown type, we check to see if it's a blob,
so we can use our streaming code path. This uses oid_object_info() to
check the type, but before doing so we call repo_has_object_file(). This
latter is pointless, as oid_object_info() will already fail if the
object is missing. Checking it ahead of time just complicates the code
and is a waste of resources (albeit small).
Let's drop the redundant check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| | |
"git fsck" failed to release contents of tree objects already used
from the memory, which has been fixed.
* jk/fsck-on-diet:
parse_object_buffer(): respect save_commit_buffer
fsck: turn off save_commit_buffer
fsck: free tree buffers after walking unreachable objects
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If the global variable "save_commit_buffer" is set to 0, then
parse_commit() will throw away the commit object data after parsing it,
rather than sticking it into a commit slab. This goes all the way back
to 60ab26de99 ([PATCH] Avoid wasting memory in git-rev-list,
2005-09-15).
But there's another code path which may similarly stash the buffer:
parse_object_buffer(). This is where we end up if we parse a commit via
parse_object(), and it's used directly in a few other code paths like
git-fsck.
The original goal of 60ab26de99 was avoiding extra memory usage for
rev-list. And there it's not all that important to catch parse_object().
We use that function only for looking at the tips of the traversal, and
the majority of the commits are parsed by following parent links, where
we use parse_commit() directly. So we were wasting some memory, but only
a small portion.
It's much easier to see the effect with fsck. Since we now turn off
save_commit_buffer by default there, we _should_ be able to drop the
freeing of the commit buffer in fsck_obj(). But if we do so (taking the
first hunk of this patch without the rest), then the peak heap of "git
fsck" in a clone of git.git goes from 136MB to 194MB. Teaching
parse_object_buffer() to respect save_commit_buffer brings that down to
134.5MB (it's hard to tell from massif's output, but I suspect the
savings comes from avoiding the overhead of the mostly-empty commit
slab).
Other programs should see a small improvement. Both "rev-list --all" and
"fsck --connectivity-only" improve by a few hundred kilobytes, as they'd
avoid loading the tip objects of their traversals.
Most importantly, no code should be hurt by doing this. Any program that
turns off save_commit_buffer is already making the assumption that any
commit it sees may need to have its object data loaded on demand, as it
doesn't know which ones were parsed by parse_commit() versus
parse_object(). Not to mention that anything parsed by the commit graph
may be in the same boat, even if save_commit_buffer was not disabled.
This should be the only spot that needs to be fixed. Grepping for
set_commit_buffer() shows that this and parse_commit() are the only
relevant calls.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If the caller told us that they don't care about us checking the object
hash, then we're free to implement any optimizations that get us the
parsed value more quickly. An obvious one is to check the commit graph
before loading an object from disk. And in fact, both of the callers who
pass in this flag are already doing so before they call parse_object()!
So we can simplify those callers, as well as any possible future ones,
by moving the logic into parse_object().
There are two subtle things to note in the diff, but neither has any
impact in practice:
- it seems least-surprising here to do the graph lookup on the
git-replace'd oid, rather than the original. This is in theory a
change of behavior from the earlier code, as neither caller did a
replace lookup itself. But in practice it doesn't matter, as we
disable the commit graph entirely if there are any replace refs.
- the caller in get_reference() passes the skip_hash flag only if
revs->verify_objects isn't set, whereas it would look in the commit
graph unconditionally. In practice this should not matter as we
should disable the commit graph entirely when using verify_objects
(and that was done recently in another patch).
So this should be a pure cleanup with no behavior change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The parse_object() function checks the object hash of any object it
parses. This is a nice feature, as it means we may catch bit corruption
during normal use, rather than waiting for specific fsck operations.
But it also can be slow. It's particularly noticeable for blobs, where
except for the hash check, we could return without loading the object
contents at all. Now one may wonder what is the point of calling
parse_object() on a blob in the first place then, but usually it's not
intentional: we were fed an oid from somewhere, don't know the type, and
want an object struct. For commits and trees, the parsing is usually
helpful; we're about to look at the contents anyway. But this is less
true for blobs, where we may be collecting them as part of a
reachability traversal, etc, and don't actually care what's in them. And
blobs, of course, tend to be larger.
We don't want to just throw out the hash-checks for blobs, though. We do
depend on them in some circumstances (e.g., rev-list --verify-objects
uses parse_object() to check them). It's only the callers that know
how they're going to use the result. And so we can help them by
providing a special flag to skip the hash check.
We could just apply this to blobs, as they're going to be the main
source of performance improvement. But if a caller doesn't care about
checking the hash, we might as well skip it for other object types, too.
Even though we can't avoid reading the object contents, we can still
skip the actual hash computation.
If this seems like it is making Git a little bit less safe against
corruption, it may be. But it's part of a series of tradeoffs we're
already making. For instance, "rev-list --objects" does not open the
contents of blobs it prints. And when a commit graph is present, we skip
opening most commits entirely. The important thing will be to use this
flag in cases where it's safe to skip the check. For instance, when
serving a pack for a fetch, we know the client will fully index the
objects and do a connectivity check itself. There's little to be gained
from the server side re-hashing a blob itself. And indeed, most of the
time we don't! The revision machinery won't open up a blob reached by
traversal, but only one requested directly with a "want" line. So
applied properly, this new feature shouldn't make anything less safe in
practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Split up the check_object_signature() function into that non-streaming
version (it accepts an already filled "buf"), and a new
stream_object_signature() which will retrieve the object from storage,
and hash it on-the-fly.
All of the callers of check_object_signature() were effectively
calling two different functions, if we go by cyclomatic
complexity. I.e. they'd either take the early "if (map)" branch and
return early, or not. This has been the case since the "if (map)"
condition was added in 090ea12671b (parse_object: avoid putting whole
blob in core, 2012-03-07).
We can then further simplify the resulting check_object_signature()
function since only one caller wanted to pass a non-NULL "buf" and a
non-NULL "real_oidp". That "read_loose_object()" codepath used by "git
fsck" can instead use hash_object_file() followed by oideq().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| | |
New interface into the tmp-objdir API to help in-core use of the
quarantine feature.
* ns/tmp-objdir:
tmp-objdir: disable ref updates when replacing the primary odb
tmp-objdir: new API for creating temporary writable databases
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The tmp_objdir API provides the ability to create temporary object
directories, but was designed with the goal of having subprocesses
access these object stores, followed by the main process migrating
objects from it to the main object store or just deleting it. The
subprocesses would view it as their primary datastore and write to it.
Here we add the tmp_objdir_replace_primary_odb function that replaces
the current process's writable "main" object directory with the
specified one. The previous main object directory is restored in either
tmp_objdir_migrate or tmp_objdir_destroy.
For the --remerge-diff usecase, add a new `will_destroy` flag in `struct
object_database` to mark ephemeral object databases that do not require
fsync durability.
Add 'git prune' support for removing temporary object databases, and
make sure that they have a name starting with tmp_ and containing an
operation-specific name.
Based-on-patch-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Adjust code added in 7463064b280 (object.h: add
lookup_object_by_type() function, 2021-06-22) to use the BUG()
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Improve the error that's emitted in cases where we find a loose object
we parse, but which isn't at the location we expect it to be.
Before this change we'd prefix the error with a not-a-OID derived from
the path at which the object was found, due to an emergent behavior in
how we'd end up with an "OID" in these codepaths.
Now we'll instead say what object we hashed, and what path it was
found at. Before this patch series e.g.:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ mv objects/e6/ objects/e7
Would emit ("[...]" used to abbreviate the OIDs):
git fsck
error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...])
error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...]
Now we'll instead emit:
error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...]
Furthermore, we'll do the right thing when the object type and its
location are bad. I.e. this case:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ mv objects/83 objects/84
As noted in an earlier commits we'd simply die early in those cases,
until preceding commits fixed the hard die on invalid object type:
$ git fsck
fatal: invalid object type
Now we'll instead emit sensible error messages:
$ git fsck
error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...]
error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...]
In both fsck.c and object-file.c we're using null_oid as a sentinel
value for checking whether we got far enough to be certain that the
issue was indeed this OID mismatch.
We need to add the "object corrupt or missing" special-case to deal
with cases where read_loose_object() will return an error before
completing check_object_signature(), e.g. if we have an error in
unpack_loose_rest() because we find garbage after the valid gzip
content:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ git fsck
error: garbage at end of loose object 'e69d[...]'
error: unable to unpack contents of ./objects/e6/9d[...]
error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...]
There is currently some weird messaging in the edge case when the two
are combined, i.e. because we're not explicitly passing along an error
state about this specific scenario from check_stream_oid() via
read_loose_object() we'll end up printing the null OID if an object is
of an unknown type *and* it can't be unpacked by zlib, e.g.:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ /usr/bin/git fsck
fatal: invalid object type
$ ~/g/git/git fsck
error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f'
error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
[...]
I think it's OK to leave that for future improvements, which would
involve enum-ifying more error state as we've done with "enum
unpack_loose_header_result" in preceding commits. In these
increasingly more obscure cases the worst that can happen is that
we'll get slightly nonsensical or inapplicable error messages.
There's other such potential edge cases, all of which might produce
some confusing messaging, but still be handled correctly as far as
passing along errors goes. E.g. if check_object_signature() returns
and oideq(real_oid, null_oid()) is true, which could happen if it
returns -1 due to the read_istream() call having failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In some cases it's useful for efficiency reasons to get the type of an
object before deciding whether to parse it, but we still want an object
struct. E.g., in reachable.c, bitmaps give us the type, but we just want
to mark flags on each object. Likewise, we may loop over every object
and only parse tags in order to peel them; checking the type first lets
us avoid parsing the non-tags.
But our lookup_blob(), etc, functions make getting an object struct
annoying: we have to call the right function for every type. And we
cannot just use the generic lookup_object(), because it only returns an
already-seen object; it won't allocate a new object struct.
Let's provide a function that dispatches to the correct lookup_*
function based on a run-time type. In fact, reachable.c already has such
a helper, so we'll just make that public.
I did change the return type from "void *" to "struct object *". While
the former is a clever way to avoid casting inside the function, it's
less safe and less informative to people reading the function
declaration.
The next commit will add a new caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
| |
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
`git rev-list` will list one commit for the following command:
$ git rev-list 'main^!'
<tip-commit-of-main-branch>
But providing the same rev-list args to `git bundle`, fail to create
a bundle file.
$ git bundle create - 'main^!'
# v2 git bundle
-<OID> <one-line-message>
fatal: Refusing to create empty bundle.
This is because when removing duplicate objects in function
`object_array_remove_duplicates()`, one unique pending object which has
the same name is deleted by mistake. The revision arg 'main^!' in the
above example is parsed by `handle_revision_arg()`, and at lease two
different objects will be appended to `revs.pending`, one points to the
parent commit of the "main" branch, and the other points to the tip
commit of the "main" branch. These two objects have the same name
"main". Only one object is left with the name "main" after calling the
function `object_array_remove_duplicates()`.
And what's worse, when adding boundary commits into pending list, we use
one-line commit message as names, and the arbitory names may surprise
git-bundle.
Only comparing objects themselves (".item") is also not good enough,
because user may want to create a bundle with two identical objects but
with different reference names, such as: "HEAD" and "refs/heads/main".
Add new function `contains_object()` which compare both the address and
the name of the object.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
| |
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The object reachability bitmap machinery and the partial cloning
machinery were not prepared to work well together, because some
object-filtering criteria that partial clones use inherently rely
on object traversal, but the bitmap machinery is an optimization
to bypass that object traversal. There however are some cases
where they can work together, and they were taught about them.
* jk/object-filter-with-bitmap:
rev-list --count: comment on the use of count_right++
pack-objects: support filters with bitmaps
pack-bitmap: implement BLOB_LIMIT filtering
pack-bitmap: implement BLOB_NONE filtering
bitmap: add bitmap_unset() function
rev-list: use bitmap filters for traversal
pack-bitmap: basic noop bitmap filter infrastructure
rev-list: allow commit-only bitmap traversals
t5310: factor out bitmap traversal comparison
rev-list: allow bitmaps when counting objects
rev-list: make --count work with --objects
rev-list: factor out bitmap-optimized routines
pack-bitmap: refuse to do a bitmap traversal with pathspecs
rev-list: fallback to non-bitmap traversal when filtering
pack-bitmap: fix leak of haves/wants object lists
pack-bitmap: factor out type iterator initialization
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When we do a bitmap-aware revision traversal, we create an object_list
for each of the "haves" and "wants" tips. After creating the result
bitmaps these are no longer needed or used, but we never free the list
memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some callers of check_object_signature() can work on arbitrary
repositories, but the repo does not get passed to this function.
Instead, the_repository is always used internally. To fix possible
inconsistencies, allow the function to receive a struct repository and
make those callers pass on the repo being handled.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
replace-object functions are very close to being thread-safe: the only
current racy section is the lazy initialization at
prepare_replace_object(). The following patches will protect some object
reading operations to be called threaded, but before that, replace
functions must be protected. To do so, add a mutex to struct
raw_object_store and acquire it before lazy initializing the
replace_map. This won't cause any noticeable performance drop as the
mutex will no longer be used after the replace_map is initialized.
Later, when the replace functions are called in parallel, thread
debuggers might point our use of the added replace_map_initialized flag
as a data race. However, as this boolean variable is initialized as
false and it's only updated once, there's no real harm. It's perfectly
fine if the value is updated right after a thread read it in
replace-map.h:lookup_replace_object() (there'll only be a performance
penalty for the affected threads at that moment). We could cease the
debugger warning protecting the variable reading at the said function.
However, this would negatively affect performance for all threads
calling it, at any time, so it's not really worthy since the warning
doesn't represent a real problem. Instead, to make sure we don't get
false positives (at ThreadSanitizer, at least) an entry for the
respective function is added to .tsan-suppressions.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When loading packfiles on start-up, we traverse the internal packfile
list once per file to avoid reloading packfiles that have already
been loaded. This check runs in quadratic time, so for poorly
maintained repos with a large number of packfiles, it can be pretty
slow.
Add a hashmap containing the packfile names as we load them so that
the average runtime cost of checking for already-loaded packs becomes
constant.
Add a perf test to p5303 to show speed-up.
The existing p5303 test runtimes are dominated by other factors and do
not show an appreciable speed-up. The new test in p5303 clearly exposes
a speed-up in bad cases. In this test we create 10,000 packfiles and
measure the start-up time of git rev-parse, which does little else
besides load in the packs.
Here are the numbers for the new p5303 test:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.12: load 10,000 packs 1.03(0.92+0.10) 0.12(0.02+0.09) -88.3%
Signed-off-by: Colin Stolley <cstolley@runbox.com>
Helped-by: Jeff King <peff@peff.net>
[jc: squashed the change to call hashmap in install_packed_git() by peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
| |
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
