Merge tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v6.12

Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document

- Convert extcon-usb-gpio.txt to yaml format for binding document

- Add new LC824206XA microUSB switch driver
 : Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
   accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
   1380. And this driver is only used on x86/ACPI (non devicetree) devices,
   Therefor there is no devicetree bindings documentation.

- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c

* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
  dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
  dt-bindings: extcon: ptn5150: add child node port
  extcon: Add LC824206XA microUSB switch driver
  power: supply: Change usb_types from an array into a bitmask
  power: supply: sysfs: Move power_supply_show_enum_with_available() up
  power: supply: sysfs: Add power_supply_show_enum_with_available() helper
  power: supply: rt9467-charger: Remove "usb_type" property write support
  power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
  power: supply: "usb_type" property may be written to

4 files changed, 54 insertions, 22 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 7c81f0a25a48..2230a207c187 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -592,7 +592,12 @@ Description:
 		the supply, for example it can show if USB-PD capable source
 		is attached.
 
-		Access: Read-Only
+		Access: For power-supplies which consume USB power such
+		as battery charger chips, this indicates the type of
+		the connected USB power source and is Read-Only.
+
+		For power-supplies which act as a USB power-source such as
+		e.g. the UCS1002 USB Port Power Controller this is writable.
 
 		Valid values:
 			      "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52d..072b3c0c5fd0 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
       GPIO pin (output) used to control VBUS. If skipped, no such control
       takes place.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the usb controller for the dual role switch.
+
 required:
   - compatible
   - interrupts
@@ -58,5 +63,11 @@ examples:
             interrupt-parent = <&msmgpio>;
             interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
             vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&usb1_drd_sw>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
deleted file mode 100644
index dfc14f71e81f..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-USB GPIO Extcon device
-
-This is a virtual device used to generate USB cable states from the USB ID pin
-connected to a GPIO pin.
-
-Required properties:
-- compatible: Should be "linux,extcon-usb-gpio"
-
-Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
-- id-gpio: gpio for USB ID pin. See gpio binding.
-- vbus-gpio: gpio for USB VBUS pin.
-
-Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
-	extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-	}
-
-	&omap_dwc3_1 {
-		extcon = <&extcon_usb1>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
new file mode 100644
index 000000000000..8856107bdd33
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB GPIO Extcon device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This is a virtual device used to generate USB cable states from the USB ID pin
+  connected to a GPIO pin.
+
+properties:
+  compatible:
+    const: linux,extcon-usb-gpio
+
+  id-gpios:
+    description: gpio for USB ID pin. See gpio binding.
+  vbus-gpios:
+    description: gpio for USB VBUS pin.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    extcon_usb1 {
+        compatible = "linux,extcon-usb-gpio";
+        id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+    };