Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

10 files changed, 55 insertions, 36 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues
index 906ff3ca928a..5bff64d256c2 100644
--- a/Documentation/ABI/testing/sysfs-class-net-queues
+++ b/Documentation/ABI/testing/sysfs-class-net-queues
@@ -1,4 +1,4 @@
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
 Date:		March 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -8,7 +8,7 @@ Description:
 		network device queue. Possible values depend on the number
 		of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+What:		/sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
 Date:		April 2010
 KernelVersion:	2.6.35
 Contact:	netdev@vger.kernel.org
@@ -16,7 +16,7 @@ Description:
 		Number of Receive Packet Steering flows being currently
 		processed by this particular network device receive queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -24,7 +24,7 @@ Description:
 		Indicates the number of transmit timeout events seen by this
 		network interface transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+What:		/sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
 Date:		March 2015
 KernelVersion:	4.1
 Contact:	netdev@vger.kernel.org
@@ -32,7 +32,7 @@ Description:
 		A Mbps max-rate set for the queue, a value of zero means disabled,
 		default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
 Date:		November 2010
 KernelVersion:	2.6.38
 Contact:	netdev@vger.kernel.org
@@ -42,7 +42,7 @@ Description:
 		network device transmit queue. Possible values depend on the
 		number of available CPU(s) in the system.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+What:		/sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
 Date:		June 2018
 KernelVersion:	4.18.0
 Contact:	netdev@vger.kernel.org
@@ -53,7 +53,7 @@ Description:
 		number of available receive queue(s) in the network device.
 		Default is disabled.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -62,7 +62,7 @@ Description:
 		of this particular network device transmit queue.
 		Default value is 1000.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -70,7 +70,7 @@ Description:
 		Indicates the number of bytes (objects) in flight on this
 		network device transmit queue.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -79,7 +79,7 @@ Description:
 		on this network device transmit queue. This value is clamped
 		to be within the bounds defined by limit_max and limit_min.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
@@ -88,7 +88,7 @@ Description:
 		queued on this network device transmit queue. See
 		include/linux/dynamic_queue_limits.h for the default value.
 
-What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+What:		/sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
 Date:		November 2011
 KernelVersion:	3.3
 Contact:	netdev@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-platform-silicom b/Documentation/ABI/testing/sysfs-platform-silicom
index 2288b3665d16..4d1cc5bdbcc5 100644
--- a/Documentation/ABI/testing/sysfs-platform-silicom
+++ b/Documentation/ABI/testing/sysfs-platform-silicom
@@ -10,6 +10,7 @@ What:		/sys/devices/platform/silicom-platform/power_cycle
 Date:		November 2023
 KernelVersion:	6.7
 Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
 		This file allow user to power cycle the platform.
 		Default value is 0; when set to 1, it powers down
 		the platform, waits 5 seconds, then powers on the
diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst
index 89984dfececf..ae3030136637 100644
--- a/Documentation/accel/introduction.rst
+++ b/Documentation/accel/introduction.rst
@@ -101,8 +101,8 @@ External References
 email threads
 -------------
 
-* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
-* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
 
 Conference talks
 ----------------
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index 102937bc8443..4410384596a9 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
 
 .. include:: kernel-parameters.txt
    :literal:
-
-Todo
-----
-
-	Add more DRM drivers.
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 993c2a05f5ee..b6aeae3327ce 100644
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
 3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 
-	a.	Build your kernel with CONFIG_SLUB=y rather than
-		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
-		use of each CPU's workqueues to run its cache_reap()
-		function.
-	b.	Avoid using oprofile, thus avoiding OS jitter from
+	a.	Avoid using oprofile, thus avoiding OS jitter from
 		wq_sync_buffer().
-	c.	Limit your CPU frequency so that a CPU-frequency
+	b.	Limit your CPU frequency so that a CPU-frequency
 		governor is not required, possibly enlisting the aid of
 		special heatsinks or other cooling technologies.  If done
 		correctly, and if you CPU architecture permits, you should
@@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
 
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	d.	As of v3.18, Christoph Lameter's on-demand vmstat workers
+	c.	As of v3.18, Christoph Lameter's on-demand vmstat workers
 		commit prevents OS jitter due to vmstat_update() on
 		CONFIG_SMP=y systems.  Before v3.18, is not possible
 		to entirely get rid of the OS jitter, but you can
@@ -274,7 +270,7 @@ To reduce its OS jitter, do any of the following:
 		(based on an earlier one from Gilad Ben-Yossef) that
 		reduces or even eliminates vmstat overhead for some
 		workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
-	e.	If running on high-end powerpc servers, build with
+	d.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
 		(This will require editing Kconfig files and will defeat
@@ -282,12 +278,12 @@ To reduce its OS jitter, do any of the following:
 		due to the rtas_event_scan() function.
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	f.	If running on Cell Processor, build your kernel with
+	e.	If running on Cell Processor, build your kernel with
 		CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
 		spu_gov_work().
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	g.	If running on PowerMAC, build your kernel with
+	f.	If running on PowerMAC, build your kernel with
 		CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
 		avoiding OS jitter from rackmeter_do_timer().
 
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index a9efab50eed8..22955d56b379 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -671,8 +671,23 @@ Testing Static Functions
 ------------------------
 
 If we do not want to expose functions or variables for testing, one option is to
-conditionally ``#include`` the test file at the end of your .c file. For
-example:
+conditionally export the used symbol. For example:
+
+.. code-block:: c
+
+	/* In my_file.c */
+
+	VISIBLE_IF_KUNIT int do_interesting_thing();
+	EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
+
+	/* In my_file.h */
+
+	#if IS_ENABLED(CONFIG_KUNIT)
+		int do_interesting_thing(void);
+	#endif
+
+Alternatively, you could conditionally ``#include`` the test file at the end of
+your .c file. For example:
 
 .. code-block:: c
 
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
index 25d53fde92e1..597c9cc6a312 100644
--- a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -85,7 +85,7 @@ allOf:
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@ allOf:
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@ allOf:
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
index 6d5569e77b7a..6a11c1d11fb5 100644
--- a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
+++ b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - ti,k3-j721s2-wave521c
+          - ti,j721s2-wave521c
       - const: cnm,wave521c
 
   reg:
@@ -53,7 +53,7 @@ additionalProperties: false
 examples:
   - |
     vpu: video-codec@12345678 {
-        compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c";
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
         reg = <0x12345678 0x1000>;
         clocks = <&clks 42>;
         interrupts = <42>;
diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml
index 1ad01d52a863..8e4d19adee8c 100644
--- a/Documentation/netlink/specs/rt_link.yaml
+++ b/Documentation/netlink/specs/rt_link.yaml
@@ -942,6 +942,10 @@ attribute-sets:
       -
         name: gro-ipv4-max-size
         type: u32
+      -
+        name: dpll-pin
+        type: nest
+        nested-attributes: link-dpll-pin-attrs
   -
     name: af-spec-attrs
     attributes:
@@ -1627,6 +1631,12 @@ attribute-sets:
       -
         name: used
         type: u8
+  -
+    name: link-dpll-pin-attrs
+    attributes:
+      -
+        name: id
+        type: u32
 
 sub-messages:
   -
diff --git a/Documentation/sphinx/templates/kernel-toc.html b/Documentation/sphinx/templates/kernel-toc.html
index b58efa99df52..41f1efbe64bb 100644
--- a/Documentation/sphinx/templates/kernel-toc.html
+++ b/Documentation/sphinx/templates/kernel-toc.html
@@ -12,5 +12,7 @@
 <script type="text/javascript"> <!--
   var sbar = document.getElementsByClassName("sphinxsidebar")[0];
   let currents = document.getElementsByClassName("current")
-  sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  if (currents.length) {
+    sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  }
   --> </script>