ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 194 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
new file mode 100644
index 000000000000..74b249bb6351
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};