ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 360 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
new file mode 100644
index 000000000000..4875afadb630
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland TGO";
+	compatible = "kvg,victgo", "fsl,imx6dl";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-enter {
+			label = "Rotary Key";
+			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-0 = <&pinctrl_rotary_ch>;
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
+			<&gpio2 4 GPIO_ACTIVE_HIGH>;
+		linux,axis = <REL_WHEEL>;
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,rollover;
+		wakeup-source;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
+			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	keypad@70 {
+		compatible = "holtek,ht16k33";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		keypad,num-rows = <12>;
+		keypad,num-columns = <3>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+		      >;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* ROTARY_BTN */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_rotary_ch: rotarychgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
+		>;
+	};
+};