ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 619 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
new file mode 100644
index 000000000000..1f84654df50c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MYIR Tech LPC4357 Development Board";
+	compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led5 {
+			gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led6 {
+			gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can_rd_cfg {
+			pins = "p3_1";
+			function = "can0";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "p3_2";
+			function = "can0";
+		};
+	};
+
+	can1_pins: can1-pins {
+		can_rd_cfg {
+			pins = "pe_1";
+			function = "can1";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "pe_0";
+			function = "can1";
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_22_cfg {
+			pins = "p2_9",  "p2_10", "p2_11", "p2_12",
+			       "p2_13", "p1_0",  "p1_1",  "p1_2",
+			       "p2_8",  "p2_7",  "p2_6",  "p2_2",
+			       "p2_1",  "p2_0",  "p6_8",  "p6_7",
+			       "pd_16", "pd_15", "pe_0",  "pe_1",
+			       "pe_2",  "pe_3",  "pe_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins = "p1_7",  "p1_8",  "p1_9",  "p1_10",
+			       "p1_11", "p1_12", "p1_13", "p1_14",
+			       "p5_4",  "p5_5",  "p5_6",  "p5_7",
+			       "p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_cs0_cfg {
+			pins = "p1_5";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dqm0_1_cfg {
+			pins = "p6_12", "p6_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1_pins_cfg {
+			pins = "pe_15", "pe_13";
+			function = "i2c1";
+			input-enable;
+		};
+	};
+
+	lcd_pins: lcd-pins {
+		lcd_vd0_23_cfg {
+			pins = "p4_1", "p4_4", "p4_3",  "p4_2",
+			       "p8_7", "p8_6", "p8_5",  "p8_4",
+			       "p7_5", "p4_8", "p4_10", "p4_9",
+			       "p8_3", "pb_6", "pb_5",  "pb_4",
+			       "p7_4", "p7_3", "p7_2",  "p7_1",
+			       "pb_3", "pb_2", "pb_1",  "pb_0";
+			function = "lcd";
+		};
+
+		lcd_vsync_en_dclk_lp_pwr_cfg {
+			pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+			function = "lcd";
+		};
+	};
+
+	led_pins: led-pins {
+		led_1_6_cfg {
+			pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_sck_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_mosi_miso_sio2_sio3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp1_pins: ssp1-pins {
+		ssp1_sck_cfg {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_miso_cfg {
+			pins = "pf_6";
+			function = "ssp1";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_mosi_cfg {
+			pins = "pf_7";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_ssel_cfg {
+			pins = "pf_5";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rxd_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		uart0_clk_dir_txd_cfg {
+			pins = "pf_8", "pf_9", "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		uart1_rxd_cfg {
+			pins = "pc_14";
+			function = "uart1";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart1_dtr_txd_cfg {
+			pins = "pc_12", "pc_13";
+			function = "uart1";
+			bias-pull-down;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rxd_cfg {
+			pins = "pa_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart2_txd_cfg {
+			pins = "pa_1";
+			function = "uart2";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable_cfg {
+			pins = "p6_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault_cfg {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		/* SST/Microchip SST39VF1601 */
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	sensor@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	max-memory-bandwidth = <92240000>;
+
+	port {
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+	phy-handle = <&phy1>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&mmcsd {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	/* Atmel AT25DF321A */
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <51000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_pins>;
+	num-cs = <1>;
+	cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+};