powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9

There are two cases outside the normal address space management
where a CPU's local TLB is to be flushed:

  1. Host boot; in case something has left stale entries in the
     TLB (e.g., kexec).

  2. Machine check; to clean corrupted TLB entries.

CPU state restore from deep idle states also flushes the TLB.
However this seems to be a side effect of reusing the boot code to set
CPU state, rather than a requirement itself.

The current flushing has a number of problems with ISA v3.0B:

- The current radix mode of the MMU is not taken into account. tlbiel
  is undefined if the R field does not match the current radix mode.

- ISA v3.0B hash must flush the partition and process table caches.

- ISA v3.0B radix must flush partition and process scoped translations,
  partition and process table caches, and also the page walk cache.

Add POWER9 cases to handle these, with radix vs hash determined by the
host MMU mode.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 10 insertions, 3 deletions

diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index 10cb2896b2ae..610955fe8b81 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -218,13 +218,20 @@ __init_tlb_power8:
 	ptesync
 1:	blr
 
+/*
+ * Flush the TLB in hash mode. Hash must flush with RIC=2 once for process
+ * and one for partition scope to clear process and partition table entries.
+ */
 __init_tlb_power9:
-	li	r6,POWER9_TLB_SETS_HASH
+	li	r6,POWER9_TLB_SETS_HASH - 1
 	mtctr	r6
 	li	r7,0xc00	/* IS field = 0b11 */
+	li	r8,0
 	ptesync
-2:	tlbiel	r7
-	addi	r7,r7,0x1000
+	PPC_TLBIEL(7, 8, 2, 1, 0)
+	PPC_TLBIEL(7, 8, 2, 0, 0)
+2:	addi	r7,r7,0x1000
+	PPC_TLBIEL(7, 8, 0, 0, 0)
 	bdnz	2b
 	ptesync
 1:	blr