net: stmmac: Add Flexible PPS support

This adds support for Flexible PPS output (which is equivalent
to per_out output of PTP subsystem).

Tested using an oscilloscope and the following commands:

1) Start PTP4L:
	# ptp4l -A -4 -H -m -i eth0 &
2) Set Flexible PPS frequency:
	# echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period

Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp
of eth0.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 39 insertions, 3 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 7d3a5c7f5db6..0cb0e39a2be9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -140,17 +140,43 @@ static int stmmac_set_time(struct ptp_clock_info *ptp,
 static int stmmac_enable(struct ptp_clock_info *ptp,
 			 struct ptp_clock_request *rq, int on)
 {
-	return -EOPNOTSUPP;
+	struct stmmac_priv *priv =
+	    container_of(ptp, struct stmmac_priv, ptp_clock_ops);
+	struct stmmac_pps_cfg *cfg;
+	int ret = -EOPNOTSUPP;
+	unsigned long flags;
+
+	switch (rq->type) {
+	case PTP_CLK_REQ_PEROUT:
+		cfg = &priv->pps[rq->perout.index];
+
+		cfg->start.tv_sec = rq->perout.start.sec;
+		cfg->start.tv_nsec = rq->perout.start.nsec;
+		cfg->period.tv_sec = rq->perout.period.sec;
+		cfg->period.tv_nsec = rq->perout.period.nsec;
+
+		spin_lock_irqsave(&priv->ptp_lock, flags);
+		ret = stmmac_flex_pps_config(priv, priv->ioaddr,
+					     rq->perout.index, cfg, on,
+					     priv->sub_second_inc,
+					     priv->systime_flags);
+		spin_unlock_irqrestore(&priv->ptp_lock, flags);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
 }
 
 /* structure describing a PTP hardware clock */
-static const struct ptp_clock_info stmmac_ptp_clock_ops = {
+static struct ptp_clock_info stmmac_ptp_clock_ops = {
 	.owner = THIS_MODULE,
 	.name = "stmmac_ptp_clock",
 	.max_adj = 62500000,
 	.n_alarm = 0,
 	.n_ext_ts = 0,
-	.n_per_out = 0,
+	.n_per_out = 0, /* will be overwritten in stmmac_ptp_register */
 	.n_pins = 0,
 	.pps = 0,
 	.adjfreq = stmmac_adjust_freq,
@@ -168,6 +194,16 @@ static const struct ptp_clock_info stmmac_ptp_clock_ops = {
  */
 void stmmac_ptp_register(struct stmmac_priv *priv)
 {
+	int i;
+
+	for (i = 0; i < priv->dma_cap.pps_out_num; i++) {
+		if (i >= STMMAC_PPS_MAX)
+			break;
+		priv->pps[i].available = true;
+	}
+
+	stmmac_ptp_clock_ops.n_per_out = priv->dma_cap.pps_out_num;
+
 	spin_lock_init(&priv->ptp_lock);
 	priv->ptp_clock_ops = stmmac_ptp_clock_ops;