Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...

1 files changed, 7 insertions, 198 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
index cfc0e65b34a5..4f81dcf57a73 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -70,55 +70,10 @@
 
 /* Scan Commands, Responses, Notifications */
 
-/* Masks for iwl_scan_channel.type flags */
-#define SCAN_CHANNEL_TYPE_ACTIVE	BIT(0)
-#define SCAN_CHANNEL_NARROW_BAND	BIT(22)
-
 /* Max number of IEs for direct SSID scans in a command */
 #define PROBE_OPTION_MAX		20
 
 /**
- * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
- * @channel: band is selected by iwl_scan_cmd "flags" field
- * @tx_gain: gain for analog radio
- * @dsp_atten: gain for DSP
- * @active_dwell: dwell time for active scan in TU, typically 5-50
- * @passive_dwell: dwell time for passive scan in TU, typically 20-500
- * @type: type is broken down to these bits:
- *	bit 0: 0 = passive, 1 = active
- *	bits 1-20: SSID direct bit map. If any of these bits is set then
- *		the corresponding SSID IE is transmitted in probe request
- *		(bit i adds IE in position i to the probe request)
- *	bit 22: channel width, 0 = regular, 1 = TGj narrow channel
- *
- * @iteration_count:
- * @iteration_interval:
- * This struct is used once for each channel in the scan list.
- * Each channel can independently select:
- * 1)  SSID for directed active scans
- * 2)  Txpower setting (for rate specified within Tx command)
- * 3)  How long to stay on-channel (behavior may be modified by quiet_time,
- *     quiet_plcp_th, good_CRC_th)
- *
- * To avoid uCode errors, make sure the following are true (see comments
- * under struct iwl_scan_cmd about max_out_time and quiet_time):
- * 1)  If using passive_dwell (i.e. passive_dwell != 0):
- *     active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
- * 2)  quiet_time <= active_dwell
- * 3)  If restricting off-channel time (i.e. max_out_time !=0):
- *     passive_dwell < max_out_time
- *     active_dwell < max_out_time
- */
-struct iwl_scan_channel {
-	__le32 type;
-	__le16 channel;
-	__le16 iteration_count;
-	__le32 iteration_interval;
-	__le16 active_dwell;
-	__le16 passive_dwell;
-} __packed; /* SCAN_CHANNEL_CONTROL_API_S_VER_1 */
-
-/**
  * struct iwl_ssid_ie - directed scan network information element
  *
  * Up to 20 of these may appear in REPLY_SCAN_CMD,
@@ -132,152 +87,6 @@ struct iwl_ssid_ie {
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 } __packed; /* SCAN_DIRECT_SSID_IE_API_S_VER_1 */
 
-/**
- * iwl_scan_flags - masks for scan command flags
- *@SCAN_FLAGS_PERIODIC_SCAN:
- *@SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX:
- *@SCAN_FLAGS_DELAYED_SCAN_LOWBAND:
- *@SCAN_FLAGS_DELAYED_SCAN_HIGHBAND:
- *@SCAN_FLAGS_FRAGMENTED_SCAN:
- *@SCAN_FLAGS_PASSIVE2ACTIVE: use active scan on channels that was active
- *	in the past hour, even if they are marked as passive.
- */
-enum iwl_scan_flags {
-	SCAN_FLAGS_PERIODIC_SCAN		= BIT(0),
-	SCAN_FLAGS_P2P_PUBLIC_ACTION_FRAME_TX	= BIT(1),
-	SCAN_FLAGS_DELAYED_SCAN_LOWBAND		= BIT(2),
-	SCAN_FLAGS_DELAYED_SCAN_HIGHBAND	= BIT(3),
-	SCAN_FLAGS_FRAGMENTED_SCAN		= BIT(4),
-	SCAN_FLAGS_PASSIVE2ACTIVE		= BIT(5),
-};
-
-/**
- * enum iwl_scan_type - Scan types for scan command
- * @SCAN_TYPE_FORCED:
- * @SCAN_TYPE_BACKGROUND:
- * @SCAN_TYPE_OS:
- * @SCAN_TYPE_ROAMING:
- * @SCAN_TYPE_ACTION:
- * @SCAN_TYPE_DISCOVERY:
- * @SCAN_TYPE_DISCOVERY_FORCED:
- */
-enum iwl_scan_type {
-	SCAN_TYPE_FORCED		= 0,
-	SCAN_TYPE_BACKGROUND		= 1,
-	SCAN_TYPE_OS			= 2,
-	SCAN_TYPE_ROAMING		= 3,
-	SCAN_TYPE_ACTION		= 4,
-	SCAN_TYPE_DISCOVERY		= 5,
-	SCAN_TYPE_DISCOVERY_FORCED	= 6,
-}; /* SCAN_ACTIVITY_TYPE_E_VER_1 */
-
-/**
- * struct iwl_scan_cmd - scan request command
- * ( SCAN_REQUEST_CMD = 0x80 )
- * @len: command length in bytes
- * @scan_flags: scan flags from SCAN_FLAGS_*
- * @channel_count: num of channels in channel list
- *	(1 - ucode_capa.n_scan_channels)
- * @quiet_time: in msecs, dwell this time for active scan on quiet channels
- * @quiet_plcp_th: quiet PLCP threshold (channel is quiet if less than
- *	this number of packets were received (typically 1)
- * @passive2active: is auto switching from passive to active during scan allowed
- * @rxchain_sel_flags: RXON_RX_CHAIN_*
- * @max_out_time: in TUs, max out of serving channel time
- * @suspend_time: how long to pause scan when returning to service channel:
- *	bits 0-19: beacon interal in TUs (suspend before executing)
- *	bits 20-23: reserved
- *	bits 24-31: number of beacons (suspend between channels)
- * @rxon_flags: RXON_FLG_*
- * @filter_flags: RXON_FILTER_*
- * @tx_cmd: for active scans (zero for passive), w/o payload,
- *	no RS so specify TX rate
- * @direct_scan: direct scan SSIDs
- * @type: one of SCAN_TYPE_*
- * @repeats: how many time to repeat the scan
- */
-struct iwl_scan_cmd {
-	__le16 len;
-	u8 scan_flags;
-	u8 channel_count;
-	__le16 quiet_time;
-	__le16 quiet_plcp_th;
-	__le16 passive2active;
-	__le16 rxchain_sel_flags;
-	__le32 max_out_time;
-	__le32 suspend_time;
-	/* RX_ON_FLAGS_API_S_VER_1 */
-	__le32 rxon_flags;
-	__le32 filter_flags;
-	struct iwl_tx_cmd tx_cmd;
-	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
-	__le32 type;
-	__le32 repeats;
-
-	/*
-	 * Probe request frame, followed by channel list.
-	 *
-	 * Size of probe request frame is specified by byte count in tx_cmd.
-	 * Channel list follows immediately after probe request frame.
-	 * Number of channels in list is specified by channel_count.
-	 * Each channel in list is of type:
-	 *
-	 * struct iwl_scan_channel channels[0];
-	 *
-	 * NOTE:  Only one band of channels can be scanned per pass.  You
-	 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
-	 * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
-	 * before requesting another scan.
-	 */
-	u8 data[0];
-} __packed; /* SCAN_REQUEST_FIXED_PART_API_S_VER_5 */
-
-/* Response to scan request contains only status with one of these values */
-#define SCAN_RESPONSE_OK	0x1
-#define SCAN_RESPONSE_ERROR	0x2
-
-/*
- * SCAN_ABORT_CMD = 0x81
- * When scan abort is requested, the command has no fields except the common
- * header. The response contains only a status with one of these values.
- */
-#define SCAN_ABORT_POSSIBLE	0x1
-#define SCAN_ABORT_IGNORED	0x2 /* no pending scans */
-
-/* TODO: complete documentation */
-#define  SCAN_OWNER_STATUS 0x1
-#define  MEASURE_OWNER_STATUS 0x2
-
-/**
- * struct iwl_scan_start_notif - notifies start of scan in the device
- * ( SCAN_START_NOTIFICATION = 0x82 )
- * @tsf_low: TSF timer (lower half) in usecs
- * @tsf_high: TSF timer (higher half) in usecs
- * @beacon_timer: structured as follows:
- *	bits 0:19 - beacon interval in usecs
- *	bits 20:23 - reserved (0)
- *	bits 24:31 - number of beacons
- * @channel: which channel is scanned
- * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
- * @status: one of *_OWNER_STATUS
- */
-struct iwl_scan_start_notif {
-	__le32 tsf_low;
-	__le32 tsf_high;
-	__le32 beacon_timer;
-	u8 channel;
-	u8 band;
-	u8 reserved[2];
-	__le32 status;
-} __packed; /* SCAN_START_NTF_API_S_VER_1 */
-
-/* scan results probe_status first bit indicates success */
-#define SCAN_PROBE_STATUS_OK		0
-#define SCAN_PROBE_STATUS_TX_FAILED	BIT(0)
-/* error statuses combined with TX_FAILED */
-#define SCAN_PROBE_STATUS_FAIL_TTL	BIT(1)
-#define SCAN_PROBE_STATUS_FAIL_BT	BIT(2)
-
 /* How many statistics are gathered for each channel */
 #define SCAN_RESULTS_STATISTICS 1
 
@@ -294,7 +103,7 @@ struct iwl_scan_start_notif {
  * @SCAN_COMP_STATUS_ERR_COEX: medium was lost ot WiMax
  * @SCAN_COMP_STATUS_P2P_ACTION_OK: P2P public action frame TX was successful
  *	(not an error!)
- * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repeatition the driver
+ * @SCAN_COMP_STATUS_ITERATION_END: indicates end of one repetition the driver
  *	asked for
  * @SCAN_COMP_STATUS_ERR_ALLOC_TE: scan could not allocate time events
 */
@@ -378,11 +187,11 @@ enum scan_framework_client {
  * struct iwl_scan_offload_cmd - SCAN_REQUEST_FIXED_PART_API_S_VER_6
  * @scan_flags:		see enum iwl_scan_flags
  * @channel_count:	channels in channel list
- * @quiet_time:		dwell time, in milisiconds, on quiet channel
+ * @quiet_time:		dwell time, in milliseconds, on quiet channel
  * @quiet_plcp_th:	quiet channel num of packets threshold
  * @good_CRC_th:	passive to active promotion threshold
  * @rx_chain:		RXON rx chain.
- * @max_out_time:	max TUs to be out of assoceated channel
+ * @max_out_time:	max TUs to be out of associated channel
  * @suspend_time:	pause scan this TUs when returning to service channel
  * @flags:		RXON flags
  * @filter_flags:	RXONfilter
@@ -423,7 +232,7 @@ enum iwl_scan_offload_channel_flags {
  *	see enum iwl_scan_offload_channel_flags.
  * __le16 channel_number: channel number 1-13 etc.
  * __le16 iter_count: repetition count for the channel.
- * __le32 iter_interval: interval between two innteration on one channel.
+ * __le32 iter_interval: interval between two iterations on one channel.
  * u8 active_dwell.
  * u8 passive_dwell.
  */
@@ -466,8 +275,8 @@ enum iwl_scan_offload_band_selection {
 /**
  * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
  * @ssid_index:		index to ssid list in fixed part
- * @unicast_cipher:	encryption olgorithm to match - bitmap
- * @aut_alg:		authentication olgorithm to match - bitmap
+ * @unicast_cipher:	encryption algorithm to match - bitmap
+ * @aut_alg:		authentication algorithm to match - bitmap
  * @network_type:	enum iwl_scan_offload_network_type
  * @band_selection:	enum iwl_scan_offload_band_selection
  * @client_bitmap:	clients waiting for match - enum scan_framework_client
@@ -939,7 +748,7 @@ enum iwl_umac_scan_general_flags {
  * @flags:		bitmap - 0-19:	directed scan to i'th ssid.
  * @channel_num:	channel number 1-13 etc.
  * @iter_count:		repetition count for the channel.
- * @iter_interval:	interval between two scan interations on one channel.
+ * @iter_interval:	interval between two scan iterations on one channel.
  */
 struct iwl_scan_channel_cfg_umac {
 	__le32 flags;