diff options
| author | Maxim Kochetkov <fido_max@inbox.ru> | 2023-06-22 21:22:45 +0200 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2023-06-25 00:39:38 +0200 |
| commit | f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9 (patch) | |
| tree | 4efa8537a735fdbf76371bbd5e1da0a1ceda8c60 /drivers/net | |
| parent | gtp: Fix use-after-free in __gtp_encap_destroy(). (diff) | |
| download | linux-f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9.tar.xz linux-f1bc9fc4a06de0108e0dca2a9a7e99ba1fc632f9.zip | |
net: axienet: Move reset before 64-bit DMA detection
64-bit DMA detection will fail if axienet was started before (by boot
loader, boot ROM, etc). In this state axienet will not start properly.
XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect
64-bit DMA capability here. But datasheet says: When DMACR.RS is 1
(axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and
is used to fetch the first descriptor. So iowrite32()/ioread32() trick
to this register to detect 64-bit DMA will not work.
So move axienet reset before 64-bit DMA detection.
Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 3e310b55bce2..734822321e0a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -2042,6 +2042,11 @@ static int axienet_probe(struct platform_device *pdev) goto cleanup_clk; } + /* Reset core now that clocks are enabled, prior to accessing MDIO */ + ret = __axienet_device_reset(lp); + if (ret) + goto cleanup_clk; + /* Autodetect the need for 64-bit DMA pointers. * When the IP is configured for a bus width bigger than 32 bits, * writing the MSB registers is mandatory, even if they are all 0. @@ -2096,11 +2101,6 @@ static int axienet_probe(struct platform_device *pdev) lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC; - /* Reset core now that clocks are enabled, prior to accessing MDIO */ - ret = __axienet_device_reset(lp); - if (ret) - goto cleanup_clk; - ret = axienet_mdio_setup(lp); if (ret) dev_warn(&pdev->dev, |