regulator: da9055: Fully convert to GPIO descriptors

The DA9055 regulator was touched before, requireing enable GPIOs
to be passed from pdata.

As we have a device for each regulator, obtain the three gpios
ren ("regulator enable"), rsel ("regulator select") and the
ena ("enable") GPIO associated with the regulator enable
directly from the device and cut down on the amount of
GPIO numbers passed as platform data.

The ren and rsel are just requested as inputs: these are
actually handled by hardware. The ena gpios are driven
actively by the regulator core.

There are no in-tree users, but the regulators are instantiated
from the (undocumed) device tree nodes with "dlg,da9055-regulator"
as compatible, and by simply adding regulator-enable-gpios,
regulator-select-gpios and enable-gpios to this DT node, all
will work as before.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-2-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 24 insertions, 24 deletions

diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 8fd9ac787588..352547c375bd 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
@@ -413,31 +412,35 @@ static struct da9055_regulator_info da9055_regulator_info[] = {
  * GPIO can control regulator state and/or select the regulator register
  * set A/B for voltage ramping.
  */
-static int da9055_gpio_init(struct da9055_regulator *regulator,
+static int da9055_gpio_init(struct device *dev,
+			    struct da9055_regulator *regulator,
 			    struct regulator_config *config,
 			    struct da9055_pdata *pdata, int id)
 {
 	struct da9055_regulator_info *info = regulator->info;
+	struct gpio_desc *ren;
+	struct gpio_desc *ena;
+	struct gpio_desc *rsel;
 	int ret = 0;
 
-	if (!pdata)
-		return 0;
+	/* Look for "regulator-enable-gpios" GPIOs in the regulator node */
+	ren = devm_gpiod_get_optional(dev, "regulator-enable", GPIOD_IN);
+	if (IS_ERR(ren))
+		return PTR_ERR(ren);
 
-	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_ren[id];
+	if (ren) {
+		/* This GPIO is not optional at this point */
+		ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+		if (IS_ERR(ena))
+			return PTR_ERR(ena);
 
-		config->ena_gpiod = pdata->ena_gpiods[id];
+		config->ena_gpiod = ena;
 
 		/*
 		 * GPI pin is muxed with regulator to control the
 		 * regulator state.
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		gpiod_set_consumer_name(ren, "DA9055 ren GPI");
 
 		/*
 		 * Let the regulator know that its state is controlled
@@ -448,24 +451,22 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 					pdata->reg_ren[id]
 					<< DA9055_E_GPI_SHIFT);
 		if (ret < 0)
-			goto err;
+			return ret;
 	}
 
-	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_rsel[id];
+	/* Look for "regulator-select-gpios" GPIOs in the regulator node */
+	rsel = devm_gpiod_get_optional(dev, "regulator-select", GPIOD_IN);
+	if (IS_ERR(rsel))
+		return PTR_ERR(rsel);
 
+	if (rsel) {
 		regulator->reg_rselect = pdata->reg_rsel[id];
 
 		/*
 		 * GPI pin is muxed with regulator to select the
 		 * regulator register set A/B for voltage ramping.
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		gpiod_set_consumer_name(rsel, "DA9055 rsel GPI");
 
 		/*
 		 * Let the regulator know that its register set A/B
@@ -477,7 +478,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 					<< DA9055_V_GPI_SHIFT);
 	}
 
-err:
 	return ret;
 }
 
@@ -532,7 +532,7 @@ static int da9055_regulator_probe(struct platform_device *pdev)
 	if (pdata)
 		config.init_data = pdata->regulators[pdev->id];
 
-	ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
+	ret = da9055_gpio_init(&pdev->dev, regulator, &config, pdata, pdev->id);
 	if (ret < 0)
 		return ret;