Merge 5.9-rc3 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 files changed, 34 insertions, 13 deletions

diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index db88dee3a399..f8e99995eee9 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -39,7 +39,7 @@ static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
 		break;
 	case UART_IER: /* IER @ 0x04 */
 		value &= 0x0f; /* only 4 valid bits - not Xscale */
-		/* fall-through */
+		fallthrough;
 	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
 	case UART_DLM_EM: /* DLM @ 0x28 (+9) */
 		writel(value, p->membase + (offset << 2));
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 04b9af7ed941..2d0e7c7e408d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -744,6 +744,24 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
 	.exit		= pci_xr17v35x_exit,
 };
 
+static const struct exar8250_board pbn_fastcom35x_2 = {
+	.num_ports	= 2,
+	.setup		= pci_xr17v35x_setup,
+	.exit		= pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_4 = {
+	.num_ports	= 4,
+	.setup		= pci_xr17v35x_setup,
+	.exit		= pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_8 = {
+	.num_ports	= 8,
+	.setup		= pci_xr17v35x_setup,
+	.exit		= pci_xr17v35x_exit,
+};
+
 static const struct exar8250_board pbn_exar_XR17V4358 = {
 	.num_ports	= 12,
 	.setup		= pci_xr17v35x_setup,
@@ -811,9 +829,9 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(EXAR, XR17V358, pbn_exar_XR17V35x),
 	EXAR_DEVICE(EXAR, XR17V4358, pbn_exar_XR17V4358),
 	EXAR_DEVICE(EXAR, XR17V8358, pbn_exar_XR17V8358),
-	EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_exar_XR17V35x),
-	EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_exar_XR17V35x),
-	EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_exar_XR17V35x),
+	EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_fastcom35x_2),
+	EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_fastcom35x_4),
+	EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_fastcom35x_8),
 
 	EXAR_DEVICE(COMMTECH, 4222PCI335, pbn_fastcom335_2),
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index d1d253c4b518..31c9e83ea3cb 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -255,7 +255,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
 	case CHIP_ID_F81866:
 		sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
 				   0);
-		/* fall through */
+		fallthrough;
 	case CHIP_ID_F81865:
 		sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
 				   F81866_IRQ_SHARE);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index d8f43f23b5b0..85810b8b9d20 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -631,7 +631,7 @@ pci_timedia_setup(struct serial_private *priv,
 		break;
 	case 3:
 		offset = board->uart_offset;
-		/* FALLTHROUGH */
+		fallthrough;
 	case 4: /* BAR 2 */
 	case 5: /* BAR 3 */
 	case 6: /* BAR 4 */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 09475695effd..c71d647eb87a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1872,7 +1872,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 	switch (iir & 0x3f) {
 	case UART_IIR_RX_TIMEOUT:
 		serial8250_rx_dma_flush(up);
-		/* fall-through */
+		fallthrough;
 	case UART_IIR_RLSI:
 		return true;
 	}
@@ -2275,6 +2275,10 @@ int serial8250_do_startup(struct uart_port *port)
 
 	if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
 		unsigned char iir1;
+
+		if (port->irqflags & IRQF_SHARED)
+			disable_irq_nosync(port->irq);
+
 		/*
 		 * Test for UARTs that do not reassert THRE when the
 		 * transmitter is idle and the interrupt has already
@@ -2284,8 +2288,6 @@ int serial8250_do_startup(struct uart_port *port)
 		 * allow register changes to become visible.
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		if (up->port.irqflags & IRQF_SHARED)
-			disable_irq_nosync(port->irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
 		serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2297,9 +2299,10 @@ int serial8250_do_startup(struct uart_port *port)
 		iir = serial_port_in(port, UART_IIR);
 		serial_port_out(port, UART_IER, 0);
 
+		spin_unlock_irqrestore(&port->lock, flags);
+
 		if (port->irqflags & IRQF_SHARED)
 			enable_irq(port->irq);
-		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
 		 * If the interrupt is not reasserted, or we otherwise
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index e0b73a5402db..a2978abab0db 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -75,7 +75,7 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
 		break;
 	case UART_LCR:
 		valshift = 8;
-		/* fall through */
+		fallthrough;
 	case UART_MCR:
 		offset = UNIPHIER_UART_LCR_MCR;
 		break;
@@ -101,7 +101,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
 	case UART_SCR:
 		/* No SCR for this hardware.  Use CHAR as a scratch register */
 		valshift = 8;
-		/* fall through */
+		fallthrough;
 	case UART_FCR:
 		offset = UNIPHIER_UART_CHAR_FCR;
 		break;
@@ -109,7 +109,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
 		valshift = 8;
 		/* Divisor latch access bit does not exist. */
 		value &= ~UART_LCR_DLAB;
-		/* fall through */
+		fallthrough;
 	case UART_MCR:
 		offset = UNIPHIER_UART_LCR_MCR;
 		break;