diff options
| -rw-r--r-- | drivers/tty/serial/sprd_serial.c | 41 |
1 files changed, 36 insertions, 5 deletions
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 397a284e3fdc..8c9366321f8e 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -53,10 +53,12 @@ #define SPRD_IEN_TX_EMPTY BIT(1) #define SPRD_IEN_BREAK_DETECT BIT(7) #define SPRD_IEN_TIMEOUT BIT(13) +#define SPRD_IEN_DATA_TIMEOUT BIT(17) /* interrupt clear register */ #define SPRD_ICLR 0x0014 #define SPRD_ICLR_TIMEOUT BIT(13) +#define SPRD_ICLR_DATA_TIMEOUT BIT(17) /* line control register */ #define SPRD_LCR 0x0018 @@ -102,6 +104,7 @@ #define SPRD_IMSR_TX_FIFO_EMPTY BIT(1) #define SPRD_IMSR_BREAK_DETECT BIT(7) #define SPRD_IMSR_TIMEOUT BIT(13) +#define SPRD_IMSR_DATA_TIMEOUT BIT(17) #define SPRD_DEFAULT_SOURCE_CLK 26000000 #define SPRD_RX_DMA_STEP 1 @@ -118,6 +121,12 @@ struct sprd_uart_dma { bool enable; }; +struct sprd_uart_data { + unsigned int timeout_ien; + unsigned int timeout_iclr; + unsigned int timeout_imsr; +}; + struct sprd_uart_port { struct uart_port port; char name[16]; @@ -126,6 +135,7 @@ struct sprd_uart_port { struct sprd_uart_dma rx_dma; dma_addr_t pos; unsigned char *rx_buf_tail; + const struct sprd_uart_data *pdata; }; static struct sprd_uart_port *sprd_port[UART_NR_MAX]; @@ -134,6 +144,18 @@ static int sprd_ports_num; static int sprd_start_dma_rx(struct uart_port *port); static int sprd_tx_dma_config(struct uart_port *port); +static const struct sprd_uart_data sc9836_data = { + .timeout_ien = SPRD_IEN_TIMEOUT, + .timeout_iclr = SPRD_ICLR_TIMEOUT, + .timeout_imsr = SPRD_IMSR_TIMEOUT, +}; + +static const struct sprd_uart_data sc9632_data = { + .timeout_ien = SPRD_IEN_DATA_TIMEOUT, + .timeout_iclr = SPRD_ICLR_DATA_TIMEOUT, + .timeout_imsr = SPRD_IMSR_DATA_TIMEOUT, +}; + static inline unsigned int serial_in(struct uart_port *port, unsigned int offset) { @@ -637,6 +659,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; unsigned int ims; + struct sprd_uart_port *sp = + container_of(port, struct sprd_uart_port, port); uart_port_lock(port); @@ -647,14 +671,14 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) return IRQ_NONE; } - if (ims & SPRD_IMSR_TIMEOUT) - serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT); + if (ims & sp->pdata->timeout_imsr) + serial_out(port, SPRD_ICLR, sp->pdata->timeout_iclr); if (ims & SPRD_IMSR_BREAK_DETECT) serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT); if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT | - SPRD_IMSR_TIMEOUT)) + sp->pdata->timeout_imsr)) sprd_rx(port); if (ims & SPRD_IMSR_TX_FIFO_EMPTY) @@ -729,7 +753,7 @@ static int sprd_startup(struct uart_port *port) /* enable interrupt */ uart_port_lock_irqsave(port, &flags); ien = serial_in(port, SPRD_IEN); - ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT; + ien |= SPRD_IEN_BREAK_DETECT | sp->pdata->timeout_ien; if (!sp->rx_dma.enable) ien |= SPRD_IEN_RX_FULL; serial_out(port, SPRD_IEN, ien); @@ -1184,6 +1208,12 @@ static int sprd_probe(struct platform_device *pdev) up->mapbase = res->start; + sport->pdata = of_device_get_match_data(&pdev->dev); + if (!sport->pdata) { + dev_err(&pdev->dev, "get match data failed!\n"); + return -EINVAL; + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -1248,7 +1278,8 @@ static int sprd_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume); static const struct of_device_id serial_ids[] = { - {.compatible = "sprd,sc9836-uart",}, + {.compatible = "sprd,sc9836-uart", .data = &sc9836_data}, + {.compatible = "sprd,sc9632-uart", .data = &sc9632_data}, {} }; MODULE_DEVICE_TABLE(of, serial_ids); |