diff options
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 163 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.c | 31 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init.h | 17 | ||||
-rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb.c | 162 |
4 files changed, 295 insertions, 78 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 0bd9ccc43323..ee49cbdb55bb 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -12,10 +12,33 @@ #include <linux/soc/brcmstb/brcmstb.h> #include "phy-brcm-usb-init.h" +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f +#define PIARBCTL_USB_M_ASB_CTRL 0x10 + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + /* Register definitions for the USB CTRL block */ #define USB_CTRL_SETUP 0x00 #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 #define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 #define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 #define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 #define USB_CTRL_SETUP_IPP_MASK 0x00000020 @@ -29,11 +52,73 @@ #define USB_CTRL_USB_DEVICE_CTL1 0x10 #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} static void xhci_soft_reset(struct brcm_usb_init_params *params, int on_off) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; /* Assert reset */ if (on_off) @@ -45,7 +130,7 @@ static void xhci_soft_reset(struct brcm_usb_init_params *params, static void usb_init_ipp(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; u32 orig_reg; @@ -72,10 +157,18 @@ static void usb_init_ipp(struct brcm_usb_init_params *params) msleep(50); } +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + static void usb_init_common(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; pr_debug("%s\n", __func__); @@ -100,6 +193,45 @@ static void usb_init_common(struct brcm_usb_init_params *params) } } +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + /* Init the PHY */ + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL); + reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + /* Fix the incorrect default */ + reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); + reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; + brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); + + usb_init_common(params); + + usb2_eye_fix_7211b0(params); +} + static void usb_init_xhci(struct brcm_usb_init_params *params) { pr_debug("%s\n", __func__); @@ -109,7 +241,7 @@ static void usb_init_xhci(struct brcm_usb_init_params *params) static void usb_uninit_common(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; pr_debug("%s\n", __func__); @@ -127,7 +259,7 @@ static void usb_uninit_xhci(struct brcm_usb_init_params *params) static int usb_get_dual_select(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg = 0; pr_debug("%s\n", __func__); @@ -139,7 +271,7 @@ static int usb_get_dual_select(struct brcm_usb_init_params *params) static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; pr_debug("%s\n", __func__); @@ -161,6 +293,16 @@ static const struct brcm_usb_init_ops bcm7216_ops = { .set_dual_select = usb_set_dual_select, }; +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) { @@ -169,3 +311,12 @@ void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) params->family_name = "7216"; params->ops = &bcm7216_ops; } + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index 80d6f54d276e..17acc3c1051b 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -401,7 +401,7 @@ void usb_ctrl_unset_family(struct brcm_usb_init_params *params, u32 mask; mask = params->usb_reg_bits_map[field]; - brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask); + brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; static inline @@ -411,7 +411,7 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params, u32 mask; mask = params->usb_reg_bits_map[field]; - brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask); + brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) @@ -544,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) { u32 ofs; int ii; - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; /* * On newer B53 based SoC's, the reference clock for the @@ -625,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) { - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; brcmusb_usb3_pll_fix(ctrl_base); brcmusb_usb3_pll_54mhz(params); @@ -667,7 +667,7 @@ static void brcmusb_memc_fix(struct brcm_usb_init_params *params) static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) { - void __iomem *xhci_ec_base = params->xhci_ec_regs; + void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; u32 val; if (params->family_id != 0x74371000 || !xhci_ec_base) @@ -680,8 +680,8 @@ static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); /* Reset USB 3.0 PHY for workaround to take effect */ - USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); - USB_CTRL_SET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); + USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); } static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, @@ -740,7 +740,7 @@ static enum brcm_family_type get_family_type( static void usb_init_ipp(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; u32 orig_reg; @@ -786,7 +786,7 @@ static void usb_init_ipp(struct brcm_usb_init_params *params) static void usb_init_common(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; /* Clear any pending wake conditions */ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); @@ -866,7 +866,7 @@ static void usb_init_common(struct brcm_usb_init_params *params) static void usb_init_eohci(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); @@ -902,7 +902,7 @@ static void usb_init_eohci(struct brcm_usb_init_params *params) static void usb_init_xhci(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); /* 1 millisecond - for USB clocks to settle down */ @@ -944,12 +944,13 @@ static void usb_uninit_eohci(struct brcm_usb_init_params *params) static void usb_uninit_xhci(struct brcm_usb_init_params *params) { brcmusb_xhci_soft_reset(params, 1); - USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, + PHY3_IDDQ_OVERRIDE); } static int usb_get_dual_select(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg = 0; pr_debug("%s\n", __func__); @@ -963,7 +964,7 @@ static int usb_get_dual_select(struct brcm_usb_init_params *params) static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; pr_debug("%s\n", __func__); @@ -980,7 +981,7 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) static void usb_wake_enable(struct brcm_usb_init_params *params, int enable) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; if (enable) USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h index db6851c55335..2ea81daf295e 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.h +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -6,12 +6,21 @@ #ifndef _USB_BRCM_COMMON_INIT_H #define _USB_BRCM_COMMON_INIT_H +#include <linux/regmap.h> + #define USB_CTLR_MODE_HOST 0 #define USB_CTLR_MODE_DEVICE 1 #define USB_CTLR_MODE_DRD 2 #define USB_CTLR_MODE_TYPEC_PD 3 -struct brcm_usb_init_params; +enum brcmusb_reg_sel { + BRCM_REGS_CTRL = 0, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + BRCM_REGS_MAX +}; #define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) #define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) @@ -41,9 +50,7 @@ struct brcm_usb_init_ops { }; struct brcm_usb_init_params { - void __iomem *ctrl_regs; - void __iomem *xhci_ec_regs; - void __iomem *xhci_gbl_regs; + void __iomem *regs[BRCM_REGS_MAX]; int ioc; int ipp; int mode; @@ -53,10 +60,12 @@ struct brcm_usb_init_params { const char *family_name; const u32 *usb_reg_bits_map; const struct brcm_usb_init_ops *ops; + struct regmap *syscon_piarbctl; }; void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); static inline u32 brcm_usb_readl(void __iomem *addr) { diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 64379ede480e..5f7bfa09494d 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> +#include <linux/mfd/syscon.h> #include "phy-brcm-usb-init.h" @@ -32,6 +33,11 @@ struct value_to_name_map { const char *name; }; +struct match_chip_info { + void *init_func; + u8 required_regs[BRCM_REGS_MAX + 1]; +}; + static struct value_to_name_map brcm_dr_mode_to_name[] = { { USB_CTLR_MODE_HOST, "host" }, { USB_CTLR_MODE_DEVICE, "peripheral" }, @@ -64,6 +70,10 @@ struct brcm_usb_phy_data { struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; }; +static s8 *node_reg_names[BRCM_REGS_MAX] = { + "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio" +}; + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) { struct phy *gphy = dev_id; @@ -241,15 +251,86 @@ static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; +static struct match_chip_info chip_info_7216 = { + .init_func = &brcm_usb_dvr_init_7216, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + -1, + }, +}; + +static struct match_chip_info chip_info_7211b0 = { + .init_func = &brcm_usb_dvr_init_7211b0, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + -1, + }, +}; + +static struct match_chip_info chip_info_7445 = { + .init_func = &brcm_usb_dvr_init_7445, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + -1, + }, +}; + static const struct of_device_id brcm_usb_dt_ids[] = { { .compatible = "brcm,bcm7216-usb-phy", - .data = &brcm_usb_dvr_init_7216, + .data = &chip_info_7216, + }, + { + .compatible = "brcm,bcm7211-usb-phy", + .data = &chip_info_7211b0, + }, + { + .compatible = "brcm,brcmstb-usb-phy", + .data = &chip_info_7445, }, - { .compatible = "brcm,brcmstb-usb-phy" }, { /* sentinel */ } }; +static int brcm_usb_get_regs(struct platform_device *pdev, + enum brcmusb_reg_sel regs, + struct brcm_usb_init_params *ini) +{ + struct resource *res; + + /* Older DT nodes have ctrl and optional xhci_ec by index only */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + node_reg_names[regs]); + if (res == NULL) { + if (regs == BRCM_REGS_CTRL) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + } else if (regs == BRCM_REGS_XHCI_EC) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + /* XHCI_EC registers are optional */ + if (res == NULL) + return 0; + } + if (res == NULL) { + dev_err(&pdev->dev, "can't get %s base address\n", + node_reg_names[regs]); + return 1; + } + } + ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ini->regs[regs])) { + dev_err(&pdev->dev, "can't map %s register space\n", + node_reg_names[regs]); + return 1; + } + return 0; +} + static int brcm_usb_phy_dvr_init(struct platform_device *pdev, struct brcm_usb_phy_data *priv, struct device_node *dn) @@ -325,9 +406,6 @@ static int brcm_usb_phy_dvr_init(struct platform_device *pdev, static int brcm_usb_phy_probe(struct platform_device *pdev) { - struct resource *res_ctrl; - struct resource *res_xhciec = NULL; - struct resource *res_xhcigbl = NULL; struct device *dev = &pdev->dev; struct brcm_usb_phy_data *priv; struct phy_provider *phy_provider; @@ -335,6 +413,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) int err; const char *mode; const struct of_device_id *match; + void (*dvr_init)(struct brcm_usb_init_params *params); + const struct match_chip_info *info; + struct regmap *rmap; + int x; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -345,58 +427,13 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) priv->ini.product_id = brcmstb_get_product_id(); match = of_match_node(brcm_usb_dt_ids, dev->of_node); - if (match && match->data) { - void (*dvr_init)(struct brcm_usb_init_params *params); - - dvr_init = match->data; - (*dvr_init)(&priv->ini); - } else { - brcm_usb_dvr_init_7445(&priv->ini); - } + info = match->data; + dvr_init = info->init_func; + (*dvr_init)(&priv->ini); dev_dbg(dev, "Best mapping table is for %s\n", priv->ini.family_name); - /* Newer DT node has reg-names. xhci_ec and xhci_gbl are optional. */ - res_ctrl = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); - if (res_ctrl != NULL) { - res_xhciec = platform_get_resource_byname(pdev, - IORESOURCE_MEM, - "xhci_ec"); - res_xhcigbl = platform_get_resource_byname(pdev, - IORESOURCE_MEM, - "xhci_gbl"); - } else { - /* Older DT node without reg-names, use index */ - res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_ctrl == NULL) { - dev_err(dev, "can't get CTRL base address\n"); - return -EINVAL; - } - res_xhciec = platform_get_resource(pdev, IORESOURCE_MEM, 1); - } - priv->ini.ctrl_regs = devm_ioremap_resource(dev, res_ctrl); - if (IS_ERR(priv->ini.ctrl_regs)) { - dev_err(dev, "can't map CTRL register space\n"); - return -EINVAL; - } - if (res_xhciec) { - priv->ini.xhci_ec_regs = - devm_ioremap_resource(dev, res_xhciec); - if (IS_ERR(priv->ini.xhci_ec_regs)) { - dev_err(dev, "can't map XHCI EC register space\n"); - return -EINVAL; - } - } - if (res_xhcigbl) { - priv->ini.xhci_gbl_regs = - devm_ioremap_resource(dev, res_xhcigbl); - if (IS_ERR(priv->ini.xhci_gbl_regs)) { - dev_err(dev, "can't map XHCI Global register space\n"); - return -EINVAL; - } - } - of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); @@ -412,6 +449,16 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (of_property_read_bool(dn, "brcm,has-eohci")) priv->has_eohci = true; + for (x = 0; x < BRCM_REGS_MAX; x++) { + if (info->required_regs[x] >= BRCM_REGS_MAX) + break; + + err = brcm_usb_get_regs(pdev, info->required_regs[x], + &priv->ini); + if (err) + return -EINVAL; + } + err = brcm_usb_phy_dvr_init(pdev, priv, dn); if (err) return err; @@ -431,6 +478,15 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) dev_warn(dev, "Error creating sysfs attributes\n"); + /* Get piarbctl syscon if it exists */ + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "syscon-piarbctl"); + if (IS_ERR(rmap)) + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "brcm,syscon-piarbctl"); + if (!IS_ERR(rmap)) + priv->ini.syscon_piarbctl = rmap; + /* start with everything off */ if (priv->has_xhci) brcm_usb_uninit_xhci(&priv->ini); |