diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/tas571x.txt')
-rw-r--r-- | Documentation/devicetree/bindings/sound/tas571x.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt deleted file mode 100644 index 1addc75989d5..000000000000 --- a/Documentation/devicetree/bindings/sound/tas571x.txt +++ /dev/null @@ -1,49 +0,0 @@ -Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers - -The codec is controlled through an I2C interface. It also has two other -signals that can be wired up to GPIOs: reset (strongly recommended), and -powerdown (optional). - -Required properties: - -- compatible: should be one of the following: - - "ti,tas5707" - - "ti,tas5711", - - "ti,tas5717", - - "ti,tas5719", - - "ti,tas5721" - - "ti,tas5733" -- reg: The I2C address of the device -- #sound-dai-cells: must be equal to 0 - -Optional properties: - -- reset-gpios: GPIO specifier for the TAS571x's active low reset line -- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line -- clocks: clock phandle for the MCLK input -- clock-names: should be "mclk" -- AVDD-supply: regulator phandle for the AVDD supply (all chips) -- DVDD-supply: regulator phandle for the DVDD supply (all chips) -- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) -- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) -- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) -- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) -- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) -- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) -- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) -- DRVDD-supply: regulator phandle for the DRVDD supply (5721) -- PVDD-supply: regulator phandle for the PVDD supply (5721) - -Example: - - tas5717: audio-codec@2a { - compatible = "ti,tas5717"; - reg = <0x2a>; - #sound-dai-cells = <0>; - - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - - clocks = <&clk_core CLK_I2S>; - clock-names = "mclk"; - }; |