diff options
Diffstat (limited to 'Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst')
| -rw-r--r-- | Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst | 188 |
1 files changed, 0 insertions, 188 deletions
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst b/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst deleted file mode 100644 index db88346d99fd..000000000000 --- a/Documentation/media/uapi/v4l/ext-ctrls-fm-tx.rst +++ /dev/null @@ -1,188 +0,0 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/media/uapi/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - -.. _fm-tx-controls: - -******************************** -FM Transmitter Control Reference -******************************** - -The FM Transmitter (FM_TX) class includes controls for common features -of FM transmissions capable devices. Currently this class includes -parameters for audio compression, pilot tone generation, audio deviation -limiter, RDS transmission and tuning power features. - - -.. _fm-tx-control-id: - -FM_TX Control IDs -================= - -``V4L2_CID_FM_TX_CLASS (class)`` - The FM_TX class descriptor. Calling - :ref:`VIDIOC_QUERYCTRL` for this control will - return a description of this control class. - -``V4L2_CID_RDS_TX_DEVIATION (integer)`` - Configures RDS signal frequency deviation level in Hz. The range and - step are driver-specific. - -``V4L2_CID_RDS_TX_PI (integer)`` - Sets the RDS Programme Identification field for transmission. - -``V4L2_CID_RDS_TX_PTY (integer)`` - Sets the RDS Programme Type field for transmission. This encodes up - to 31 pre-defined programme types. - -``V4L2_CID_RDS_TX_PS_NAME (string)`` - Sets the Programme Service name (PS_NAME) for transmission. It is - intended for static display on a receiver. It is the primary aid to - listeners in programme service identification and selection. In - Annex E of :ref:`iec62106`, the RDS specification, there is a full - description of the correct character encoding for Programme Service - name strings. Also from RDS specification, PS is usually a single - eight character text. However, it is also possible to find receivers - which can scroll strings sized as 8 x N characters. So, this control - must be configured with steps of 8 characters. The result is it must - always contain a string with size multiple of 8. - -``V4L2_CID_RDS_TX_RADIO_TEXT (string)`` - Sets the Radio Text info for transmission. It is a textual - description of what is being broadcasted. RDS Radio Text can be - applied when broadcaster wishes to transmit longer PS names, - programme-related information or any other text. In these cases, - RadioText should be used in addition to ``V4L2_CID_RDS_TX_PS_NAME``. - The encoding for Radio Text strings is also fully described in Annex - E of :ref:`iec62106`. The length of Radio Text strings depends on - which RDS Block is being used to transmit it, either 32 (2A block) - or 64 (2B block). However, it is also possible to find receivers - which can scroll strings sized as 32 x N or 64 x N characters. So, - this control must be configured with steps of 32 or 64 characters. - The result is it must always contain a string with size multiple of - 32 or 64. - -``V4L2_CID_RDS_TX_MONO_STEREO (boolean)`` - Sets the Mono/Stereo bit of the Decoder Identification code. If set, - then the audio was recorded as stereo. - -``V4L2_CID_RDS_TX_ARTIFICIAL_HEAD (boolean)`` - Sets the - `Artificial Head <http://en.wikipedia.org/wiki/Artificial_head>`__ - bit of the Decoder Identification code. If set, then the audio was - recorded using an artificial head. - -``V4L2_CID_RDS_TX_COMPRESSED (boolean)`` - Sets the Compressed bit of the Decoder Identification code. If set, - then the audio is compressed. - -``V4L2_CID_RDS_TX_DYNAMIC_PTY (boolean)`` - Sets the Dynamic PTY bit of the Decoder Identification code. If set, - then the PTY code is dynamically switched. - -``V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT (boolean)`` - If set, then a traffic announcement is in progress. - -``V4L2_CID_RDS_TX_TRAFFIC_PROGRAM (boolean)`` - If set, then the tuned programme carries traffic announcements. - -``V4L2_CID_RDS_TX_MUSIC_SPEECH (boolean)`` - If set, then this channel broadcasts music. If cleared, then it - broadcasts speech. If the transmitter doesn't make this distinction, - then it should be set. - -``V4L2_CID_RDS_TX_ALT_FREQS_ENABLE (boolean)`` - If set, then transmit alternate frequencies. - -``V4L2_CID_RDS_TX_ALT_FREQS (__u32 array)`` - The alternate frequencies in kHz units. The RDS standard allows for - up to 25 frequencies to be defined. Drivers may support fewer - frequencies so check the array size. - -``V4L2_CID_AUDIO_LIMITER_ENABLED (boolean)`` - Enables or disables the audio deviation limiter feature. The limiter - is useful when trying to maximize the audio volume, minimize - receiver-generated distortion and prevent overmodulation. - -``V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (integer)`` - Sets the audio deviation limiter feature release time. Unit is in - useconds. Step and range are driver-specific. - -``V4L2_CID_AUDIO_LIMITER_DEVIATION (integer)`` - Configures audio frequency deviation level in Hz. The range and step - are driver-specific. - -``V4L2_CID_AUDIO_COMPRESSION_ENABLED (boolean)`` - Enables or disables the audio compression feature. This feature - amplifies signals below the threshold by a fixed gain and compresses - audio signals above the threshold by the ratio of Threshold/(Gain + - Threshold). - -``V4L2_CID_AUDIO_COMPRESSION_GAIN (integer)`` - Sets the gain for audio compression feature. It is a dB value. The - range and step are driver-specific. - -``V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (integer)`` - Sets the threshold level for audio compression freature. It is a dB - value. The range and step are driver-specific. - -``V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (integer)`` - Sets the attack time for audio compression feature. It is a useconds - value. The range and step are driver-specific. - -``V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (integer)`` - Sets the release time for audio compression feature. It is a - useconds value. The range and step are driver-specific. - -``V4L2_CID_PILOT_TONE_ENABLED (boolean)`` - Enables or disables the pilot tone generation feature. - -``V4L2_CID_PILOT_TONE_DEVIATION (integer)`` - Configures pilot tone frequency deviation level. Unit is in Hz. The - range and step are driver-specific. - -``V4L2_CID_PILOT_TONE_FREQUENCY (integer)`` - Configures pilot tone frequency value. Unit is in Hz. The range and - step are driver-specific. - -``V4L2_CID_TUNE_PREEMPHASIS`` - (enum) - -enum v4l2_preemphasis - - Configures the pre-emphasis value for broadcasting. A pre-emphasis - filter is applied to the broadcast to accentuate the high audio - frequencies. Depending on the region, a time constant of either 50 - or 75 useconds is used. The enum v4l2_preemphasis defines possible - values for pre-emphasis. Here they are: - - - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_PREEMPHASIS_DISABLED`` - - No pre-emphasis is applied. - * - ``V4L2_PREEMPHASIS_50_uS`` - - A pre-emphasis of 50 uS is used. - * - ``V4L2_PREEMPHASIS_75_uS`` - - A pre-emphasis of 75 uS is used. - - - -``V4L2_CID_TUNE_POWER_LEVEL (integer)`` - Sets the output power level for signal transmission. Unit is in - dBuV. Range and step are driver-specific. - -``V4L2_CID_TUNE_ANTENNA_CAPACITOR (integer)`` - This selects the value of antenna tuning capacitor manually or - automatically if set to zero. Unit, range and step are - driver-specific. - -For more details about RDS specification, refer to :ref:`iec62106` -document, from CENELEC. |