diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm8650-qrd.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 128 |
1 files changed, 109 insertions, 19 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 4e94f7fe4d2d..b0d7927b708f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -203,6 +203,71 @@ }; }; }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en>; + + wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + /* + * TODO Add bt-enable-gpios once the Bluetooth driver is + * converted to using the power sequencer. + */ + + vdd-supply = <&vreg_s4i_0p85>; + vddio-supply = <&vreg_l15b_1p8>; + vddio1p2-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_s2c_0p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p8-supply = <&vreg_s6c_1p8>; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -832,11 +897,6 @@ &mdss_dp0_out { data-lanes = <0 1>; - remote-endpoint = <&usb_dp_qmpphy_dp_in>; -}; - -&pcie_1_phy_aux_clk { - clock-frequency = <1000>; }; &pcie0 { @@ -849,6 +909,23 @@ status = "okay"; }; +&pcieport0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + &pcie0_phy { vdda-phy-supply = <&vreg_l1i_0p88>; vdda-pll-supply = <&vreg_l3i_1p2>; @@ -1012,6 +1089,16 @@ sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Speaker Right */ @@ -1025,6 +1112,16 @@ sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3c_1p2>; + + /* + * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) + * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) + * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) + * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) + * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) + * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) + */ + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -1143,6 +1240,13 @@ bias-disable; output-low; }; + + wlan_en: wlan-en-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; &uart14 { @@ -1211,10 +1315,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_1_dwc3_ss { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; -}; - &usb_1_hsphy { vdd-supply = <&vreg_l1i_0p88>; vdda12-supply = <&vreg_l3i_1p2>; @@ -1228,23 +1328,13 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; - orientation-switch; - status = "okay"; }; -&usb_dp_qmpphy_dp_in { - remote-endpoint = <&mdss_dp0_out>; -}; - &usb_dp_qmpphy_out { remote-endpoint = <&redriver_ss_in>; }; -&usb_dp_qmpphy_usb_ss_in { - remote-endpoint = <&usb_1_dwc3_ss>; -}; - &xo_board { clock-frequency = <76800000>; }; |