diff options
Diffstat (limited to 'arch/tile/include/arch/mpipe_shm.h')
| -rw-r--r-- | arch/tile/include/arch/mpipe_shm.h | 521 |
1 files changed, 0 insertions, 521 deletions
diff --git a/arch/tile/include/arch/mpipe_shm.h b/arch/tile/include/arch/mpipe_shm.h deleted file mode 100644 index 13b3c4300e50..000000000000 --- a/arch/tile/include/arch/mpipe_shm.h +++ /dev/null @@ -1,521 +0,0 @@ -/* - * Copyright 2012 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -/* Machine-generated file; do not edit. */ - - -#ifndef __ARCH_MPIPE_SHM_H__ -#define __ARCH_MPIPE_SHM_H__ - -#include <arch/abi.h> -#include <arch/mpipe_shm_def.h> - -#ifndef __ASSEMBLER__ -/** - * MPIPE eDMA Descriptor. - * The eDMA descriptor is written by software and consumed by hardware. It - * is used to specify the location of egress packet data to be sent out of - * the chip via one of the packet interfaces. - */ - -__extension__ -typedef union -{ - struct - { - /* Word 0 */ - -#ifndef __BIG_ENDIAN__ - /** - * Generation number. Used to indicate a valid descriptor in ring. When - * a new descriptor is written into the ring, software must toggle this - * bit. The net effect is that the GEN bit being written into new - * descriptors toggles each time the ring tail pointer wraps. - */ - uint_reg_t gen : 1; - /** - * For devices with EDMA reorder support, this field allows the - * descriptor to select the egress FIFO. The associated DMA ring must - * have ALLOW_EFIFO_SEL enabled. - */ - uint_reg_t efifo_sel : 6; - /** Reserved. Must be zero. */ - uint_reg_t r0 : 1; - /** Checksum generation enabled for this transfer. */ - uint_reg_t csum : 1; - /** - * Nothing to be sent. Used, for example, when software has dropped a - * packet but still wishes to return all of the associated buffers. - */ - uint_reg_t ns : 1; - /** - * Notification interrupt will be delivered when packet has been egressed. - */ - uint_reg_t notif : 1; - /** - * Boundary indicator. When 1, this transfer includes the EOP for this - * command. Must be clear on all but the last descriptor for an egress - * packet. - */ - uint_reg_t bound : 1; - /** Reserved. Must be zero. */ - uint_reg_t r1 : 4; - /** - * Number of bytes to be sent for this descriptor. When zero, no data - * will be moved and the buffer descriptor will be ignored. If the - * buffer descriptor indicates that it is chained, the low 7 bits of the - * VA indicate the offset within the first buffer (e.g. 127 bytes is the - * maximum offset into the first buffer). If the size exceeds a single - * buffer, subsequent buffer descriptors will be fetched prior to - * processing the next eDMA descriptor in the ring. - */ - uint_reg_t xfer_size : 14; - /** Reserved. Must be zero. */ - uint_reg_t r2 : 2; - /** - * Destination of checksum relative to CSUM_START relative to the first - * byte moved by this descriptor. Must be zero if CSUM=0 in this - * descriptor. Must be less than XFER_SIZE (e.g. the first byte of the - * CSUM_DEST must be within the span of this descriptor). - */ - uint_reg_t csum_dest : 8; - /** - * Start byte of checksum relative to the first byte moved by this - * descriptor. If this is not the first descriptor for the egress - * packet, CSUM_START is still relative to the first byte in this - * descriptor. Must be zero if CSUM=0 in this descriptor. - */ - uint_reg_t csum_start : 8; - /** - * Initial value for 16-bit 1's compliment checksum if enabled via CSUM. - * Specified in network order. That is, bits[7:0] will be added to the - * byte pointed to by CSUM_START and bits[15:8] will be added to the byte - * pointed to by CSUM_START+1 (with appropriate 1's compliment carries). - * Must be zero if CSUM=0 in this descriptor. - */ - uint_reg_t csum_seed : 16; -#else /* __BIG_ENDIAN__ */ - uint_reg_t csum_seed : 16; - uint_reg_t csum_start : 8; - uint_reg_t csum_dest : 8; - uint_reg_t r2 : 2; - uint_reg_t xfer_size : 14; - uint_reg_t r1 : 4; - uint_reg_t bound : 1; - uint_reg_t notif : 1; - uint_reg_t ns : 1; - uint_reg_t csum : 1; - uint_reg_t r0 : 1; - uint_reg_t efifo_sel : 6; - uint_reg_t gen : 1; -#endif - - /* Word 1 */ - -#ifndef __BIG_ENDIAN__ - /** Virtual address. Must be sign extended by consumer. */ - int_reg_t va : 42; - /** Reserved. */ - uint_reg_t __reserved_0 : 6; - /** Index of the buffer stack to which this buffer belongs. */ - uint_reg_t stack_idx : 5; - /** Reserved. */ - uint_reg_t __reserved_1 : 3; - /** - * Instance ID. For devices that support automatic buffer return between - * mPIPE instances, this field indicates the buffer owner. If the INST - * field does not match the mPIPE's instance number when a packet is - * egressed, buffers with HWB set will be returned to the other mPIPE - * instance. Note that not all devices support multi-mPIPE buffer - * return. The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates - * whether the INST field in the buffer descriptor is populated by iDMA - * hardware. - */ - uint_reg_t inst : 2; - /** - * Always set to one by hardware in iDMA packet descriptors. For eDMA, - * indicates whether the buffer will be released to the buffer stack - * manager. When 0, software is responsible for releasing the buffer. - */ - uint_reg_t hwb : 1; - /** - * Encoded size of buffer. Set by the ingress hardware for iDMA packet - * descriptors. For eDMA descriptors, indicates the buffer size if .c - * indicates a chained packet. If an eDMA descriptor is not chained and - * the .hwb bit is not set, this field is ignored and the size is - * specified by the .xfer_size field. - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t size : 3; - /** - * Chaining configuration for the buffer. Indicates that an ingress - * packet or egress command is chained across multiple buffers, with each - * buffer's size indicated by the .size field. - */ - uint_reg_t c : 2; -#else /* __BIG_ENDIAN__ */ - uint_reg_t c : 2; - uint_reg_t size : 3; - uint_reg_t hwb : 1; - uint_reg_t inst : 2; - uint_reg_t __reserved_1 : 3; - uint_reg_t stack_idx : 5; - uint_reg_t __reserved_0 : 6; - int_reg_t va : 42; -#endif - - }; - - /** Word access */ - uint_reg_t words[2]; -} MPIPE_EDMA_DESC_t; - -/** - * MPIPE Packet Descriptor. - * The packet descriptor is filled by the mPIPE's classification, - * load-balancing, and buffer management services. Some fields are consumed - * by mPIPE hardware, and others are consumed by Tile software. - */ - -__extension__ -typedef union -{ - struct - { - /* Word 0 */ - -#ifndef __BIG_ENDIAN__ - /** - * Notification ring into which this packet descriptor is written. - * Typically written by load balancer, but can be overridden by - * classification program if NR is asserted. - */ - uint_reg_t notif_ring : 8; - /** Source channel for this packet. Written by mPIPE DMA hardware. */ - uint_reg_t channel : 5; - /** Reserved. */ - uint_reg_t __reserved_0 : 1; - /** - * MAC Error. - * Generated by the MAC interface. Asserted if there was an overrun of - * the MAC's receive FIFO. This condition generally only occurs if the - * mPIPE clock is running too slowly. - */ - uint_reg_t me : 1; - /** - * Truncation Error. - * Written by the iDMA hardware. Asserted if packet was truncated due to - * insufficient space in iPkt buffer - */ - uint_reg_t tr : 1; - /** - * Written by the iDMA hardware. Indicates the number of bytes written - * to Tile memory. In general, this is the actual size of the packet as - * received from the MAC. But if the packet is truncated due to running - * out of buffers or due to the iPkt buffer filling up, then the L2_SIZE - * will be reduced to reflect the actual number of valid bytes written to - * Tile memory. - */ - uint_reg_t l2_size : 14; - /** - * CRC Error. - * Generated by the MAC. Asserted if MAC indicated an L2 CRC error or - * other L2 error (bad length etc.) on the packet. - */ - uint_reg_t ce : 1; - /** - * Cut Through. - * Written by the iDMA hardware. Asserted if packet was not completely - * received before being sent to classifier. L2_Size will indicate - * number of bytes received so far. - */ - uint_reg_t ct : 1; - /** - * Written by the classification program. Used by the load balancer to - * select the ring into which this packet descriptor is written. - */ - uint_reg_t bucket_id : 13; - /** Reserved. */ - uint_reg_t __reserved_1 : 3; - /** - * Checksum. - * Written by classification program. When 1, the checksum engine will - * perform checksum based on the CSUM_SEED, CSUM_START, and CSUM_BYTES - * fields. The result will be placed in CSUM_VAL. - */ - uint_reg_t cs : 1; - /** - * Notification Ring Select. - * Written by the classification program. When 1, the NotifRingIDX is - * set by classification program rather than being set by load balancer. - */ - uint_reg_t nr : 1; - /** - * Written by classification program. Indicates whether packet and - * descriptor should both be dropped, both be delivered, or only the - * descriptor should be delivered. - */ - uint_reg_t dest : 2; - /** - * General Purpose Sequence Number Enable. - * Written by the classification program. When 1, the GP_SQN_SEL field - * contains the sequence number selector and the GP_SQN field will be - * replaced with the associated sequence number. When clear, the GP_SQN - * field is left intact and be used as "Custom" bytes. - */ - uint_reg_t sq : 1; - /** - * TimeStamp Enable. - * Enable TimeStamp insertion. When clear, timestamp field may be filled - * with custom data by classifier. When set, hardware inserts the - * timestamp when the start of packet is received from the MAC. - */ - uint_reg_t ts : 1; - /** - * Packet Sequence Number Enable. - * Enable PacketSQN insertion. When clear, PacketSQN field may be filled - * with custom data by classifier. When set, hardware inserts the packet - * sequence number when the packet descriptor is written to a - * notification ring. - */ - uint_reg_t ps : 1; - /** - * Buffer Error. - * Written by the iDMA hardware. Asserted if iDMA ran out of buffers - * while writing the packet. Software must still return any buffer - * descriptors whose C field indicates a valid descriptor was consumed. - */ - uint_reg_t be : 1; - /** - * Written by the classification program. The associated counter is - * incremented when the packet is sent. - */ - uint_reg_t ctr0 : 5; - /** Reserved. */ - uint_reg_t __reserved_2 : 3; -#else /* __BIG_ENDIAN__ */ - uint_reg_t __reserved_2 : 3; - uint_reg_t ctr0 : 5; - uint_reg_t be : 1; - uint_reg_t ps : 1; - uint_reg_t ts : 1; - uint_reg_t sq : 1; - uint_reg_t dest : 2; - uint_reg_t nr : 1; - uint_reg_t cs : 1; - uint_reg_t __reserved_1 : 3; - uint_reg_t bucket_id : 13; - uint_reg_t ct : 1; - uint_reg_t ce : 1; - uint_reg_t l2_size : 14; - uint_reg_t tr : 1; - uint_reg_t me : 1; - uint_reg_t __reserved_0 : 1; - uint_reg_t channel : 5; - uint_reg_t notif_ring : 8; -#endif - - /* Word 1 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. The associated counter is - * incremented when the packet is sent. - */ - uint_reg_t ctr1 : 5; - /** Reserved. */ - uint_reg_t __reserved_3 : 3; - /** - * Written by classification program. Indicates the start byte for - * checksum. Relative to 1st byte received from MAC. - */ - uint_reg_t csum_start : 8; - /** - * Checksum seed written by classification program. Overwritten with - * resultant checksum if CS bit is asserted. The endianness of the CSUM - * value bits when viewed by Tile software match the packet byte order. - * That is, bits[7:0] of the resulting checksum value correspond to - * earlier (more significant) bytes in the packet. To avoid classifier - * software from having to byte swap the CSUM_SEED, the iDMA checksum - * engine byte swaps the classifier's result before seeding the checksum - * calculation. Thus, the CSUM_START byte of packet data is added to - * bits[15:8] of the CSUM_SEED field generated by the classifier. This - * byte swap will be visible to Tile software if the CS bit is clear. - */ - uint_reg_t csum_seed_val : 16; - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom0 : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom0 : 32; - uint_reg_t csum_seed_val : 16; - uint_reg_t csum_start : 8; - uint_reg_t __reserved_3 : 3; - uint_reg_t ctr1 : 5; -#endif - - /* Word 2 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom1 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom1 : 64; -#endif - - /* Word 3 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom2 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom2 : 64; -#endif - - /* Word 4 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by the classification program. Not interpreted by mPIPE - * hardware. - */ - uint_reg_t custom3 : 64; -#else /* __BIG_ENDIAN__ */ - uint_reg_t custom3 : 64; -#endif - - /* Word 5 */ - -#ifndef __BIG_ENDIAN__ - /** - * Sequence number applied when packet is distributed. Classifier - * selects which sequence number is to be applied by writing the 13-bit - * SQN-selector into this field. For devices that support EXT_SQN (as - * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to - * 32-bits via the IDMA_CTL.EXT_SQN register. In this case the - * PACKET_SQN will be reduced to 32 bits. - */ - uint_reg_t gp_sqn : 16; - /** - * Written by notification hardware. The packet sequence number is - * incremented for each packet that wasn't dropped. - */ - uint_reg_t packet_sqn : 48; -#else /* __BIG_ENDIAN__ */ - uint_reg_t packet_sqn : 48; - uint_reg_t gp_sqn : 16; -#endif - - /* Word 6 */ - -#ifndef __BIG_ENDIAN__ - /** - * Written by hardware when the start-of-packet is received by the mPIPE - * from the MAC. This is the nanoseconds part of the packet timestamp. - */ - uint_reg_t time_stamp_ns : 32; - /** - * Written by hardware when the start-of-packet is received by the mPIPE - * from the MAC. This is the seconds part of the packet timestamp. - */ - uint_reg_t time_stamp_sec : 32; -#else /* __BIG_ENDIAN__ */ - uint_reg_t time_stamp_sec : 32; - uint_reg_t time_stamp_ns : 32; -#endif - - /* Word 7 */ - -#ifndef __BIG_ENDIAN__ - /** Virtual address. Must be sign extended by consumer. */ - int_reg_t va : 42; - /** Reserved. */ - uint_reg_t __reserved_4 : 6; - /** Index of the buffer stack to which this buffer belongs. */ - uint_reg_t stack_idx : 5; - /** Reserved. */ - uint_reg_t __reserved_5 : 3; - /** - * Instance ID. For devices that support automatic buffer return between - * mPIPE instances, this field indicates the buffer owner. If the INST - * field does not match the mPIPE's instance number when a packet is - * egressed, buffers with HWB set will be returned to the other mPIPE - * instance. Note that not all devices support multi-mPIPE buffer - * return. The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates - * whether the INST field in the buffer descriptor is populated by iDMA - * hardware. - */ - uint_reg_t inst : 2; - /** - * Always set to one by hardware in iDMA packet descriptors. For eDMA, - * indicates whether the buffer will be released to the buffer stack - * manager. When 0, software is responsible for releasing the buffer. - */ - uint_reg_t hwb : 1; - /** - * Encoded size of buffer. Set by the ingress hardware for iDMA packet - * descriptors. For eDMA descriptors, indicates the buffer size if .c - * indicates a chained packet. If an eDMA descriptor is not chained and - * the .hwb bit is not set, this field is ignored and the size is - * specified by the .xfer_size field. - * 0 = 128 bytes - * 1 = 256 bytes - * 2 = 512 bytes - * 3 = 1024 bytes - * 4 = 1664 bytes - * 5 = 4096 bytes - * 6 = 10368 bytes - * 7 = 16384 bytes - */ - uint_reg_t size : 3; - /** - * Chaining configuration for the buffer. Indicates that an ingress - * packet or egress command is chained across multiple buffers, with each - * buffer's size indicated by the .size field. - */ - uint_reg_t c : 2; -#else /* __BIG_ENDIAN__ */ - uint_reg_t c : 2; - uint_reg_t size : 3; - uint_reg_t hwb : 1; - uint_reg_t inst : 2; - uint_reg_t __reserved_5 : 3; - uint_reg_t stack_idx : 5; - uint_reg_t __reserved_4 : 6; - int_reg_t va : 42; -#endif - - }; - - /** Word access */ - uint_reg_t words[8]; -} MPIPE_PDESC_t; -#endif /* !defined(__ASSEMBLER__) */ - -#endif /* !defined(__ARCH_MPIPE_SHM_H__) */ |