diff options
Diffstat (limited to 'drivers/media/platform/marvell-ccic/mmp-driver.c')
| -rw-r--r-- | drivers/media/platform/marvell-ccic/mmp-driver.c | 238 |
1 files changed, 55 insertions, 183 deletions
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index bf4d4a47f1db..10559492e09e 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -4,13 +4,12 @@ * to work with the Armada 610 as used in the OLPC 1.75 system. * * Copyright 2011 Jonathan Corbet <corbet@lwn.net> + * Copyright 2018 Lubomir Rintel <lkundrak@v3.sk> */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/i2c.h> -#include <linux/platform_data/i2c-gpio.h> #include <linux/interrupt.h> #include <linux/spinlock.h> #include <linux/slab.h> @@ -18,10 +17,10 @@ #include <media/v4l2-device.h> #include <linux/platform_data/media/mmp-camera.h> #include <linux/device.h> +#include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/io.h> -#include <linux/delay.h> #include <linux/list.h> #include <linux/pm.h> #include <linux/clk.h> @@ -32,10 +31,9 @@ MODULE_ALIAS("platform:mmp-camera"); MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); MODULE_LICENSE("GPL"); -static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"}; +static char *mcam_clks[] = {"axi", "func", "phy"}; struct mmp_camera { - void __iomem *power_regs; struct platform_device *pdev; struct mcam_camera mcam; struct list_head devlist; @@ -91,118 +89,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) return NULL; } - - - -/* - * Power-related registers; this almost certainly belongs - * somewhere else. - * - * ARMADA 610 register manual, sec 7.2.1, p1842. - */ -#define CPU_SUBSYS_PMU_BASE 0xd4282800 -#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */ -#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */ -#define REG_CCIC2_CRCR 0xf4 /* CCIC2 clk reset ctrl reg */ - -static void mcam_clk_enable(struct mcam_camera *mcam) -{ - unsigned int i; - - for (i = 0; i < NR_MCAM_CLK; i++) { - if (!IS_ERR(mcam->clk[i])) - clk_prepare_enable(mcam->clk[i]); - } -} - -static void mcam_clk_disable(struct mcam_camera *mcam) -{ - int i; - - for (i = NR_MCAM_CLK - 1; i >= 0; i--) { - if (!IS_ERR(mcam->clk[i])) - clk_disable_unprepare(mcam->clk[i]); - } -} - -/* - * Power control. - */ -static void mmpcam_power_up_ctlr(struct mmp_camera *cam) -{ - iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); - mdelay(1); -} - -static int mmpcam_power_up(struct mcam_camera *mcam) -{ - struct mmp_camera *cam = mcam_to_cam(mcam); - struct mmp_camera_platform_data *pdata; - -/* - * Turn on power and clocks to the controller. - */ - mmpcam_power_up_ctlr(cam); -/* - * Provide power to the sensor. - */ - mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002); - pdata = cam->pdev->dev.platform_data; - gpio_set_value(pdata->sensor_power_gpio, 1); - mdelay(5); - mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000); - gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */ - mdelay(5); - gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ - mdelay(5); - - mcam_clk_enable(mcam); - - return 0; -} - -static void mmpcam_power_down(struct mcam_camera *mcam) -{ - struct mmp_camera *cam = mcam_to_cam(mcam); - struct mmp_camera_platform_data *pdata; -/* - * Turn off clocks and set reset lines - */ - iowrite32(0, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0, cam->power_regs + REG_CCIC_CRCR); -/* - * Shut down the sensor. - */ - pdata = cam->pdev->dev.platform_data; - gpio_set_value(pdata->sensor_power_gpio, 0); - gpio_set_value(pdata->sensor_reset_gpio, 0); - - mcam_clk_disable(mcam); -} - -static void mcam_ctlr_reset(struct mcam_camera *mcam) -{ - unsigned long val; - struct mmp_camera *cam = mcam_to_cam(mcam); - - if (mcam->ccic_id) { - /* - * Using CCIC2 - */ - val = ioread32(cam->power_regs + REG_CCIC2_CRCR); - iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR); - iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR); - } else { - /* - * Using CCIC1 - */ - val = ioread32(cam->power_regs + REG_CCIC_CRCR); - iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR); - iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR); - } -} - /* * calc the dphy register values * There are three dphy registers being used. @@ -334,13 +220,10 @@ static int mmpcam_probe(struct platform_device *pdev) struct mmp_camera *cam; struct mcam_camera *mcam; struct resource *res; + struct fwnode_handle *ep; struct mmp_camera_platform_data *pdata; int ret; - pdata = pdev->dev.platform_data; - if (!pdata) - return -ENODEV; - cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL); if (cam == NULL) return -ENOMEM; @@ -348,25 +231,31 @@ static int mmpcam_probe(struct platform_device *pdev) INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; - mcam->plat_power_up = mmpcam_power_up; - mcam->plat_power_down = mmpcam_power_down; - mcam->ctlr_reset = mcam_ctlr_reset; mcam->calc_dphy = mmpcam_calc_dphy; mcam->dev = &pdev->dev; - mcam->use_smbus = 0; - mcam->ccic_id = pdev->id; - mcam->mclk_min = pdata->mclk_min; - mcam->mclk_src = pdata->mclk_src; - mcam->mclk_div = pdata->mclk_div; - mcam->bus_type = pdata->bus_type; - mcam->dphy = pdata->dphy; + pdata = pdev->dev.platform_data; + if (pdata) { + mcam->mclk_src = pdata->mclk_src; + mcam->mclk_div = pdata->mclk_div; + mcam->bus_type = pdata->bus_type; + mcam->dphy = pdata->dphy; + mcam->lane = pdata->lane; + } else { + /* + * These are values that used to be hardcoded in mcam-core and + * work well on a OLPC XO 1.75 with a parallel bus sensor. + * If it turns out other setups make sense, the values should + * be obtained from the device tree. + */ + mcam->mclk_src = 3; + mcam->mclk_div = 2; + } if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) { cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) return PTR_ERR(cam->mipi_clk); } mcam->mipi_enabled = false; - mcam->lane = pdata->lane; mcam->chip_id = MCAM_ARMADA610; mcam->buffer_mode = B_DMA_sg; strscpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info)); @@ -379,54 +268,39 @@ static int mmpcam_probe(struct platform_device *pdev) if (IS_ERR(mcam->regs)) return PTR_ERR(mcam->regs); mcam->regs_size = resource_size(res); + + mcam_init_clk(mcam); + /* - * Power/clock memory is elsewhere; get it too. Perhaps this - * should really be managed outside of this driver? - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - cam->power_regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(cam->power_regs)) - return PTR_ERR(cam->power_regs); - /* - * Find the i2c adapter. This assumes, of course, that the - * i2c bus is already up and functioning. + * Create a match of the sensor against its OF node. */ - mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); - if (mcam->i2c_adapter == NULL) { - dev_err(&pdev->dev, "No i2c adapter\n"); + ep = fwnode_graph_get_next_endpoint(of_fwnode_handle(pdev->dev.of_node), + NULL); + if (!ep) return -ENODEV; - } - /* - * Sensor GPIO pins. - */ - ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio, - "cam-power"); - if (ret) { - dev_err(&pdev->dev, "Can't get sensor power gpio %d", - pdata->sensor_power_gpio); - return ret; - } - gpio_direction_output(pdata->sensor_power_gpio, 0); - ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio, - "cam-reset"); - if (ret) { - dev_err(&pdev->dev, "Can't get sensor reset gpio %d", - pdata->sensor_reset_gpio); - return ret; - } - gpio_direction_output(pdata->sensor_reset_gpio, 0); - mcam_init_clk(mcam); + mcam->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; + mcam->asd.match.fwnode = fwnode_graph_get_remote_port_parent(ep); + + fwnode_handle_put(ep); /* - * Power the device up and hand it off to the core. + * Register the device with the core. */ - ret = mmpcam_power_up(mcam); - if (ret) - return ret; ret = mccic_register(mcam); if (ret) - goto out_power_down; + return ret; + + /* + * Add OF clock provider. + */ + ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, + mcam->mclk); + if (ret) { + dev_err(&pdev->dev, "can't add DT clock provider\n"); + goto out; + } + /* * Finally, set up our IRQ now that the core is ready to * deal with it. @@ -434,7 +308,7 @@ static int mmpcam_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { ret = -ENODEV; - goto out_unregister; + goto out; } cam->irq = res->start; ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED, @@ -444,10 +318,10 @@ static int mmpcam_probe(struct platform_device *pdev) return 0; } -out_unregister: +out: + fwnode_handle_put(mcam->asd.match.fwnode); mccic_shutdown(mcam); -out_power_down: - mmpcam_power_down(mcam); + return ret; } @@ -458,7 +332,6 @@ static int mmpcam_remove(struct mmp_camera *cam) mmpcam_remove_device(cam); mccic_shutdown(mcam); - mmpcam_power_down(mcam); return 0; } @@ -490,17 +363,15 @@ static int mmpcam_resume(struct platform_device *pdev) { struct mmp_camera *cam = mmpcam_find_device(pdev); - /* - * Power up unconditionally just in case the core tries to - * touch a register even if nothing was active before; trust - * me, it's better this way. - */ - mmpcam_power_up_ctlr(cam); return mccic_resume(&cam->mcam); } #endif +static const struct of_device_id mmpcam_of_match[] = { + { .compatible = "marvell,mmp2-ccic", }, + {}, +}; static struct platform_driver mmpcam_driver = { .probe = mmpcam_probe, @@ -511,6 +382,7 @@ static struct platform_driver mmpcam_driver = { #endif .driver = { .name = "mmp-camera", + .of_match_table = of_match_ptr(mmpcam_of_match), } }; |