diff options
Diffstat (limited to 'drivers/media/usb/cx231xx/cx231xx-core.c')
-rw-r--r-- | drivers/media/usb/cx231xx/cx231xx-core.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 9b5cd9e9b169..229e855fc7f2 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -20,6 +20,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "cx231xx.h" #include <linux/init.h> #include <linux/list.h> #include <linux/module.h> @@ -29,7 +30,6 @@ #include <media/v4l2-common.h> #include <media/tuner.h> -#include "cx231xx.h" #include "cx231xx-reg.h" /* #define ENABLE_DEBUG_ISOC_FRAMES */ @@ -228,7 +228,7 @@ int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus, /* call common vendor command request */ status = cx231xx_send_vendor_cmd(dev, &ven_req); if (status < 0) { - cx231xx_info + pr_info ("UsbInterface::sendCommand, failed with status -%d\n", status); } @@ -524,7 +524,7 @@ int cx231xx_set_video_alternate(struct cx231xx *dev) usb_set_interface(dev->udev, usb_interface_index, dev->video_mode.alt); if (errCode < 0) { - cx231xx_errdev + pr_err ("cannot change alt number to %d (error=%i)\n", dev->video_mode.alt, errCode); return errCode; @@ -600,7 +600,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) } if (alt > 0 && max_pkt_size == 0) { - cx231xx_errdev + pr_err ("can't change interface %d alt no. to %d: Max. Pkt size = 0\n", usb_interface_index, alt); /*To workaround error number=-71 on EP0 for videograbber, @@ -616,7 +616,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) if (usb_interface_index > 0) { status = usb_set_interface(dev->udev, usb_interface_index, alt); if (status < 0) { - cx231xx_errdev + pr_err ("can't change interface %d alt no. to %d (err=%i)\n", usb_interface_index, alt, status); return status; @@ -768,7 +768,7 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size) buffer = kzalloc(4096, GFP_KERNEL); if (buffer == NULL) { - cx231xx_info("out of mem\n"); + pr_info("out of mem\n"); return -ENOMEM; } memcpy(&buffer[0], firmware, 4096); @@ -777,7 +777,7 @@ int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size) buffer, 4096, &actlen, 2000); if (ret) - cx231xx_info("bulk message failed: %d (%d/%d)", ret, + pr_info("bulk message failed: %d (%d/%d)", ret, size, actlen); else { errCode = actlen != size ? -1 : 0; @@ -988,7 +988,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, dma_q->p_left_data = kzalloc(4096, GFP_KERNEL); if (dma_q->p_left_data == NULL) { - cx231xx_info("out of mem\n"); + pr_info("out of mem\n"); return -ENOMEM; } @@ -1018,14 +1018,14 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, dev->video_mode.isoc_ctl.urb = kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL); if (!dev->video_mode.isoc_ctl.urb) { - cx231xx_errdev("cannot alloc memory for usb buffers\n"); + pr_err("cannot alloc memory for usb buffers\n"); return -ENOMEM; } dev->video_mode.isoc_ctl.transfer_buffer = kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL); if (!dev->video_mode.isoc_ctl.transfer_buffer) { - cx231xx_errdev("cannot allocate memory for usbtransfer\n"); + pr_err("cannot allocate memory for usbtransfer\n"); kfree(dev->video_mode.isoc_ctl.urb); return -ENOMEM; } @@ -1045,7 +1045,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { - cx231xx_err("cannot alloc isoc_ctl.urb %i\n", i); + pr_err("cannot alloc isoc_ctl.urb %i\n", i); cx231xx_uninit_isoc(dev); return -ENOMEM; } @@ -1055,7 +1055,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) { - cx231xx_err("unable to allocate %i bytes for transfer" + pr_err("unable to allocate %i bytes for transfer" " buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); @@ -1090,7 +1090,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i], GFP_ATOMIC); if (rc) { - cx231xx_err("submit of urb %i failed (error=%i)\n", i, + pr_err("submit of urb %i failed (error=%i)\n", i, rc); cx231xx_uninit_isoc(dev); return rc; @@ -1151,14 +1151,14 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, dev->video_mode.bulk_ctl.urb = kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL); if (!dev->video_mode.bulk_ctl.urb) { - cx231xx_errdev("cannot alloc memory for usb buffers\n"); + pr_err("cannot alloc memory for usb buffers\n"); return -ENOMEM; } dev->video_mode.bulk_ctl.transfer_buffer = kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL); if (!dev->video_mode.bulk_ctl.transfer_buffer) { - cx231xx_errdev("cannot allocate memory for usbtransfer\n"); + pr_err("cannot allocate memory for usbtransfer\n"); kfree(dev->video_mode.bulk_ctl.urb); return -ENOMEM; } @@ -1178,7 +1178,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) { urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { - cx231xx_err("cannot alloc bulk_ctl.urb %i\n", i); + pr_err("cannot alloc bulk_ctl.urb %i\n", i); cx231xx_uninit_bulk(dev); return -ENOMEM; } @@ -1189,7 +1189,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) { - cx231xx_err("unable to allocate %i bytes for transfer" + pr_err("unable to allocate %i bytes for transfer" " buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); @@ -1212,7 +1212,7 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i], GFP_ATOMIC); if (rc) { - cx231xx_err("submit of urb %i failed (error=%i)\n", i, + pr_err("submit of urb %i failed (error=%i)\n", i, rc); cx231xx_uninit_bulk(dev); return rc; @@ -1316,7 +1316,7 @@ int cx231xx_dev_init(struct cx231xx *dev) errCode = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ENXTERNAL_AV); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: Failed to set Power - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1325,7 +1325,7 @@ int cx231xx_dev_init(struct cx231xx *dev) errCode = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ANALOGT_TV); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: Failed to set Power - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1340,14 +1340,14 @@ int cx231xx_dev_init(struct cx231xx *dev) /* initialize Colibri block */ errCode = cx231xx_afe_init_super_block(dev, 0x23c); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: cx231xx_afe init super block - errCode [%d]!\n", __func__, errCode); return errCode; } errCode = cx231xx_afe_init_channels(dev); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: cx231xx_afe init channels - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1356,7 +1356,7 @@ int cx231xx_dev_init(struct cx231xx *dev) /* Set DIF in By pass mode */ errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1365,7 +1365,7 @@ int cx231xx_dev_init(struct cx231xx *dev) /* I2S block related functions */ errCode = cx231xx_i2s_blk_initialize(dev); if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: cx231xx_i2s block initialize - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1374,7 +1374,7 @@ int cx231xx_dev_init(struct cx231xx *dev) /* init control pins */ errCode = cx231xx_init_ctrl_pin_status(dev); if (errCode < 0) { - cx231xx_errdev("%s: cx231xx_init ctrl pins - errCode [%d]!\n", + pr_err("%s: cx231xx_init ctrl pins - errCode [%d]!\n", __func__, errCode); return errCode; } @@ -1400,7 +1400,7 @@ int cx231xx_dev_init(struct cx231xx *dev) break; } if (errCode < 0) { - cx231xx_errdev + pr_err ("%s: cx231xx_AGC mode to Analog - errCode [%d]!\n", __func__, errCode); return errCode; @@ -1477,7 +1477,7 @@ int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val, /* call common vendor command request */ status = cx231xx_send_vendor_cmd(dev, &ven_req); if (status < 0) { - cx231xx_info + pr_info ("UsbInterface::sendCommand, failed with status -%d\n", status); } |