1 files changed, 17 insertions, 17 deletions

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 71aa6af08340..17c0f26e683a 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -384,7 +384,7 @@ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
 
 /**
  * pm8001_bar4_shift - function is called to shift BAR base address
- * @pm8001_ha : our hba card infomation
+ * @pm8001_ha : our hba card information
  * @shiftValue : shifting value in memory bar.
  */
 int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
@@ -1151,7 +1151,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
 }
 
 /**
- * pm8001_chip_iounmap - which maped when initialized.
+ * pm8001_chip_iounmap - which mapped when initialized.
  * @pm8001_ha: our hba card information
  */
 void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
@@ -1187,10 +1187,10 @@ pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
 	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
 }
 
- /**
-  * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
-  * @pm8001_ha: our hba card information
-  */
+/**
+ * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
 static void
 pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
 {
@@ -1876,8 +1876,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
  * @piomb: the message contents of this outbound message.
  *
  * When FW has completed a ssp request for example a IO request, after it has
- * filled the SG data with the data, it will trigger this event represent
- * that he has finished the job,please check the coresponding buffer.
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
  * So we will tell the caller who maybe waiting the result to tell upper layer
  * that the task has been finished.
  */
@@ -1930,7 +1930,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			   param);
 		if (param == 0) {
 			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAM_STAT_GOOD;
+			ts->stat = SAS_SAM_STAT_GOOD;
 		} else {
 			ts->resp = SAS_TASK_COMPLETE;
 			ts->stat = SAS_PROTO_RESPONSE;
@@ -2390,7 +2390,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
 		if (param == 0) {
 			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAM_STAT_GOOD;
+			ts->stat = SAS_SAM_STAT_GOOD;
 			/* check if response is for SEND READ LOG */
 			if (pm8001_dev &&
 				(pm8001_dev->id & NCQ_READ_LOG_FLAG)) {
@@ -2912,7 +2912,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	case IO_SUCCESS:
 		pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
 		ts->resp = SAS_TASK_COMPLETE;
-		ts->stat = SAM_STAT_GOOD;
+		ts->stat = SAS_SAM_STAT_GOOD;
 		if (pm8001_dev)
 			atomic_dec(&pm8001_dev->running_req);
 		break;
@@ -2939,17 +2939,17 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	case IO_ERROR_HW_TIMEOUT:
 		pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
 		ts->resp = SAS_TASK_COMPLETE;
-		ts->stat = SAM_STAT_BUSY;
+		ts->stat = SAS_SAM_STAT_BUSY;
 		break;
 	case IO_XFER_ERROR_BREAK:
 		pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
 		ts->resp = SAS_TASK_COMPLETE;
-		ts->stat = SAM_STAT_BUSY;
+		ts->stat = SAS_SAM_STAT_BUSY;
 		break;
 	case IO_XFER_ERROR_PHY_NOT_READY:
 		pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
 		ts->resp = SAS_TASK_COMPLETE;
-		ts->stat = SAM_STAT_BUSY;
+		ts->stat = SAS_SAM_STAT_BUSY;
 		break;
 	case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
 		pm8001_dbg(pm8001_ha, IO,
@@ -3522,7 +3522,7 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
  *
  * when sas layer find a device it will notify LLDD, then the driver register
  * the domain device to FW, this event is the return device ID which the FW
- * has assigned, from now,inter-communication with FW is no longer using the
+ * has assigned, from now, inter-communication with FW is no longer using the
  * SAS address, use device ID which FW assigned.
  */
 int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
@@ -3710,7 +3710,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	case IO_SUCCESS:
 		pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n");
 		ts->resp = SAS_TASK_COMPLETE;
-		ts->stat = SAM_STAT_GOOD;
+		ts->stat = SAS_SAM_STAT_GOOD;
 		break;
 	case IO_NOT_VALID:
 		pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n");
@@ -4357,7 +4357,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
 
 			spin_lock_irqsave(&task->task_state_lock, flags);
 			ts->resp = SAS_TASK_COMPLETE;
-			ts->stat = SAM_STAT_GOOD;
+			ts->stat = SAS_SAM_STAT_GOOD;
 			task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
 			task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
 			task->task_state_flags |= SAS_TASK_STATE_DONE;