diff options
Diffstat (limited to 'drivers/usb/cdns3/cdnsp-ring.c')
| -rw-r--r-- | drivers/usb/cdns3/cdnsp-ring.c | 30 |
1 files changed, 29 insertions, 1 deletions
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 02f297f5637d..dbd83d321bca 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -402,7 +402,7 @@ static u64 cdnsp_get_hw_deq(struct cdnsp_device *pdev, struct cdnsp_stream_ctx *st_ctx; struct cdnsp_ep *pep; - pep = &pdev->eps[stream_id]; + pep = &pdev->eps[ep_index]; if (pep->ep_state & EP_HAS_STREAMS) { st_ctx = &pep->stream_info.stream_ctx_array[stream_id]; @@ -1905,6 +1905,23 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq) return ret; /* + * workaround 1: STOP EP command on LINK TRB with TC bit set to 1 + * causes that internal cycle bit can have incorrect state after + * command complete. In consequence empty transfer ring can be + * incorrectly detected when EP is resumed. + * NOP TRB before LINK TRB avoid such scenario. STOP EP command is + * then on NOP TRB and internal cycle bit is not changed and have + * correct value. + */ + if (pep->wa1_nop_trb) { + field = le32_to_cpu(pep->wa1_nop_trb->trans_event.flags); + field ^= TRB_CYCLE; + + pep->wa1_nop_trb->trans_event.flags = cpu_to_le32(field); + pep->wa1_nop_trb = NULL; + } + + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle * state may change as we enqueue the other TRBs, so save it too. @@ -1999,6 +2016,17 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq) send_addr = addr; } + if (cdnsp_trb_is_link(ring->enqueue + 1)) { + field = TRB_TYPE(TRB_TR_NOOP) | TRB_IOC; + if (!ring->cycle_state) + field |= TRB_CYCLE; + + pep->wa1_nop_trb = ring->enqueue; + + cdnsp_queue_trb(pdev, ring, 0, 0x0, 0x0, + TRB_INTR_TARGET(0), field); + } + cdnsp_check_trb_math(preq, enqd_len); ret = cdnsp_giveback_first_trb(pdev, pep, preq->request.stream_id, start_cycle, start_trb); |