Add key ENCRYPTION_NO_VERIFY to conf

Add ENCRYPTION_NO_VERIFY config key and allow to disable checking
encryption status for given type of drives.

The key is introduced because of SATA Opal disks for which TPM commands
must be enabled in libata kernel module, (libata.allow_tpm=1), otherwise
it is impossible to verify encryption status. TPM commands are disabled by
default.

Currently the key only supports the "sata_opal" value, if necessary,
the functionality is ready to support more types of disks. This
functionality will be used in the next patches.

Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>

4 files changed, 50 insertions, 5 deletions

diff --git a/config.c b/config.c
index 44f7dd2f..b46d71cb 100644
--- a/config.c
+++ b/config.c
@@ -81,7 +81,7 @@ char DefaultAltConfDir[] = CONFFILE2 ".d";
 
 enum linetype { Devices, Array, Mailaddr, Mailfrom, Program, CreateDev,
 		Homehost, HomeCluster, AutoMode, Policy, PartPolicy, Sysfs,
-		MonitorDelay, LTEnd };
+		MonitorDelay, EncryptionNoVerify, LTEnd };
 char *keywords[] = {
 	[Devices]  = "devices",
 	[Array]    = "array",
@@ -96,6 +96,7 @@ char *keywords[] = {
 	[PartPolicy]="part-policy",
 	[Sysfs]    = "sysfs",
 	[MonitorDelay] = "monitordelay",
+	[EncryptionNoVerify] = "ENCRYPTION_NO_VERIFY",
 	[LTEnd]    = NULL
 };
 
@@ -729,6 +730,19 @@ void monitordelayline(char *line)
 	}
 }
 
+static bool sata_opal_encryption_no_verify;
+void encryption_no_verify_line(char *line)
+{
+	char *word;
+
+	for (word = dl_next(line); word != line; word = dl_next(word)) {
+		if (strcasecmp(word, "sata_opal") == 0)
+			sata_opal_encryption_no_verify = true;
+		else
+			pr_err("unrecognised word on ENCRYPTION_NO_VERIFY line: %s\n", word);
+	}
+}
+
 char auto_yes[] = "yes";
 char auto_no[] = "no";
 char auto_homehost[] = "homehost";
@@ -913,6 +927,9 @@ void conf_file(FILE *f)
 		case MonitorDelay:
 			monitordelayline(line);
 			break;
+		case EncryptionNoVerify:
+			encryption_no_verify_line(line);
+			break;
 		default:
 			pr_err("Unknown keyword %s\n", line);
 		}
@@ -1075,6 +1092,12 @@ int conf_get_monitor_delay(void)
 	return monitor_delay;
 }
 
+bool conf_get_sata_opal_encryption_no_verify(void)
+{
+	load_conffile();
+	return sata_opal_encryption_no_verify;
+}
+
 struct createinfo *conf_get_create_info(void)
 {
 	load_conffile();
diff --git a/drive_encryption.c b/drive_encryption.c
index d520f0c7..6b2bd358 100644
--- a/drive_encryption.c
+++ b/drive_encryption.c
@@ -656,10 +656,18 @@ get_ata_encryption_information(int disk_fd, struct encryption_information *infor
 	if (status == MDADM_STATUS_ERROR)
 		return MDADM_STATUS_ERROR;
 
-	if (is_ata_trusted_computing_supported(buffer_identify) &&
-	    !sysfs_is_libata_allow_tpm_enabled(verbose)) {
-		pr_vrb("For SATA with Trusted Computing support, required libata.tpm_enabled=1.\n");
-		return MDADM_STATUS_ERROR;
+	/* Possible OPAL support, further checks require tpm_enabled.*/
+	if (is_ata_trusted_computing_supported(buffer_identify)) {
+		/* OPAL SATA encryption checking disabled. */
+		if (conf_get_sata_opal_encryption_no_verify())
+			return MDADM_STATUS_SUCCESS;
+
+		if (!sysfs_is_libata_allow_tpm_enabled(verbose)) {
+			pr_vrb("Detected SATA drive /dev/%s with Trusted Computing support.\n",
+			       fd2kname(disk_fd));
+			pr_vrb("Cannot verify encryption state. Requires libata.tpm_enabled=1.\n");
+			return MDADM_STATUS_ERROR;
+		}
 	}
 
 	ata_opal_status = is_ata_opal(disk_fd, buffer_identify, verbose);
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
index 787e51e9..afb0a296 100644
--- a/mdadm.conf.5.in
+++ b/mdadm.conf.5.in
@@ -636,6 +636,17 @@ If multiple
 .B MINITORDELAY
 lines are provided, only first non-zero value is considered.
 
+.TP
+.B ENCRYPTION_NO_VERIFY
+The
+.B ENCRYPTION_NO_VERIFY
+disables encryption verification for devices with particular encryption support detected.
+Currently, only verification of SATA OPAL encryption can be disabled.
+It does not disable ATA security encryption verification.
+Available parameter
+.I "sata_opal".
+
+
 .SH FILES
 
 .SS {CONFFILE}
@@ -744,6 +755,8 @@ SYSFS uuid=bead5eb6:31c17a27:da120ba2:7dfda40d group_thread_cnt=4
 sync_speed_max=1000000
 .br
 MONITORDELAY 60
+.br
+ENCRYPTION_NO_VERIFY sata_opal
 
 .SH SEE ALSO
 .BR mdadm (8),
diff --git a/mdadm.h b/mdadm.h
index 52a66b9a..2640b396 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1673,6 +1673,7 @@ extern char *conf_get_program(void);
 extern char *conf_get_homehost(int *require_homehostp);
 extern char *conf_get_homecluster(void);
 extern int conf_get_monitor_delay(void);
+extern bool conf_get_sata_opal_encryption_no_verify(void);
 extern char *conf_line(FILE *file);
 extern char *conf_word(FILE *file, int allow_key);
 extern void print_quoted(char *str);