Merge tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v6.12

Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document

- Convert extcon-usb-gpio.txt to yaml format for binding document

- Add new LC824206XA microUSB switch driver
 : Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
   accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
   1380. And this driver is only used on x86/ACPI (non devicetree) devices,
   Therefor there is no devicetree bindings documentation.

- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c

* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
  dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
  dt-bindings: extcon: ptn5150: add child node port
  extcon: Add LC824206XA microUSB switch driver
  power: supply: Change usb_types from an array into a bitmask
  power: supply: sysfs: Move power_supply_show_enum_with_available() up
  power: supply: sysfs: Add power_supply_show_enum_with_available() helper
  power: supply: rt9467-charger: Remove "usb_type" property write support
  power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
  power: supply: "usb_type" property may be written to

1 files changed, 11 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52d..072b3c0c5fd0 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
       GPIO pin (output) used to control VBUS. If skipped, no such control
       takes place.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the usb controller for the dual role switch.
+
 required:
   - compatible
   - interrupts
@@ -58,5 +63,11 @@ examples:
             interrupt-parent = <&msmgpio>;
             interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
             vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&usb1_drd_sw>;
+                };
+            };
         };
     };